Jump to content
SAU Community

Recommended Posts

I have a R32 Skyline and lately it has been making a rattling noise at night. The noise comes in once the turbo kicks in or once i put my foot about halfway. I can rev the engine all the way out without the noise coming in if i give it a small amount of acceleration. The rattling sounds like its coming from the turbo but im not sure. The rattling also gets faster with the more acceration i give it or the more revs its doing. The rattling noise sounds like metal.

During the day my car is fine and I hear no noises at all. During the night the noise starts but the car still performs perfect. There has also been some nights where there is no noise as well. I thought it might be a bolt loose somewhere in the engine or something becasue it still perfroms well and it doesnt make this noise during the day and only sometimes at night.

Any ideas would be Great!!

Thanks

Matt

Link to comment
https://www.sau.com.au/forums/topic/126900-r32-making-rattling-sound-at-night/
Share on other sites

check all the bolts are tight

you can remove the intake pipe to the turbo, and check for excessive shaft play (or any signs that the turbine has been contacting with the housing)

it could also be just an exhaust gasket leak or cooler piping. check this also.

I have a R32 Skyline and lately it has been making a rattling noise at night. The noise comes in once the turbo kicks in or once i put my foot about halfway. I can rev the engine all the way out without the noise coming in if i give it a small amount of acceleration. The rattling sounds like its coming from the turbo but im not sure. The rattling also gets faster with the more acceration i give it or the more revs its doing. The rattling noise sounds like metal.

During the day my car is fine and I hear no noises at all. During the night the noise starts but the car still performs perfect. There has also been some nights where there is no noise as well. I thought it might be a bolt loose somewhere in the engine or something becasue it still perfroms well and it doesnt make this noise during the day and only sometimes at night.

Any ideas would be Great!!

Thanks

Matt

Sounds exactly like detonation to me especially the "sounds like metal" part, actually everything in this post screams internal destruction. :)

As it only occurs at full throttle.......

Nights are colder than day, colder air is denser, denser air requires more fuel, fuel can't be supplied as fuel pump is on its last legs and finally.... as the fuel pump is on its last legs the cooler denser air is enough to have it start pinging. :wave:

Time to throw it on a dyno for a cheapo power run to see whats going on. Everything you have described indicates this, apart from the faster as engine rev's increase. :O Unless you mean louder? I have this horrible image in my head of you holding it down going yea see its getting faster, as the detonation becomes more and more intense sounding, but surely a motor couldn't live through such abuse. :(

So... I'm back at square one.. nfi. Could be a million things. :(

Get some one to look at it.

Im probably totally wrong, but wouldnt the the frequency of the detonation increase as revs increase?

The higher the revs, the more detonation you will get per second because you obviosuly have more strokes per second?

but surely a motor couldn't live through such abuse

The old holden 202 did... it pinged for 3 years, constantly....

mind you, its hardly the epitome of technological excellence.... :wave:

what i want to know is why roughly 50% of cars on the road today seem to ping?

you drive next to them in traffic an you can hear it as they accelerate, and i cringe :

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, plenty of air flow, there is a dedicated path that feeds the air in to the OEM intake tube behind the bumper As for a "tangible effect", maybe, but getting the pod/intake air out of the hot engine bay is worth it psychologically to me, even if it gives no performance difference, so the tangible effect in my Lizard brain saysss yessss  In the end, to me a tangible effect isn't always about performance, sometimes it a sound or a look, or even a...... feeling  Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga
    • yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Quite right, if you make it to that pension you deserve every cent
    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
×
×
  • Create New...