Jump to content
SAU Community

Weird Hissing Sound Coming From R32

Rekin
 Share

Recommended Posts

Rekin Grand Master

Rekin

Posted
Posted

Hey, Question for the r32 drivers out there :)

Been test driving a couple of r32's and noticed when i reach speeds of 60km/h+ i hear some kind of hissing/distortion sound on the right side of the steering wheel, near the air vents. The faster the speed becomes the louder and more irritating the sound is. It sounds like the hissing sound produced by poor quality speakers.

When i first heard this sound I came to the conclusion it was due to the poor job of the front bar which was causing air resistance.

Then i test drove a different r32 and heard the same sound...

Sound only comes from drivers side and no hissing is heard on the passenger side.

Radio was turned off in both cars as advised in test drives of cars.

Anyone know what this could be? Is this a common fault in r32's?

Thanks

- Patrick

Link to comment
https://www.sau.com.au/forums/topic/126956-weird-hissing-sound-coming-from-r32/
Share on other sites
GTR_VSpecII Explorer

GTR_VSpecII

Posted
Posted

Patrick

The sound that you are hearing is the sound of air getting between the window and the door seal around the mirror. It can be found in many older cars. The drivers door mainly, as it is opened and closed more frequently.

Jason.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      The Evolution Of "night Fury"

      By Dose Pipe Sutututu · Posted

      glitch in the matrix haha
    • Dose Pipe Sutututu
      Why am I hitting a power wall with my stroked RB25?

      By Dose Pipe Sutututu · Posted

      A few suggestions: Do you have the option of retarding your exhaust cam gear to bring the power band over to the left? VCT would be turned off after you make peak torque, you see the power/torque will decay faster with it left on all the way to the limiter Once VCT is turned off, you'll find the motor will take a bit more timing being ramped in Send its mum, more boost! Of course, depends on your exhaust pressure.
    • dyl33
      The Evolution Of "night Fury"

      By dyl33 · Posted

      Tow a boat... people won't know wtf is going on 🤣 
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      I was back on the dyno again yesterday after completely revamping my methanol injection system. I was making 440kw at 19psi. Great, this is more then I was making last summer with my old meth system at that pressure, and I figured it would be smooth sailing up to 30+psi. We continued increasing from there and by 25psi, I had only hit 455kw. Dyno sadly lost utility power at this point and I left. We seemed to be on course to hit the same power wall as last summer (477kw@27psi). This is a built RB25 S1 stroked to a 2.8. Built and ported head with Kelford 272/262 cams. Precision 6466 Turbo. Tuner last year believed the power wall is a mix of RPM limitations (Hydro lifters/Limit set at 7600RPM) and fueling. With my new meth system, we're seeing zero knock now but it still won't go up.  What else can I do at this point? Here's my train of thought.  - It's clear from the dyno graph that I would easily make power to 8500+RPM but I'm limited to 7600RPM. I could risk increasing my limiter, but hydro lifters have me worried. What are my options here besides going NEO head or solid lifter conversion? I'm rocking a 1.05AR turbine on my 6466. Would dropping down to a .84 help shift that power down in anyway? - We're only seeing roughly a 30kw difference at the top end with VCT on or off. Is this normal? I want to confirm VCT is working properly. - Should I look into other cam options?  - Should I just keep increasing boost and see if she wakes up later on? I would expect to hit 600rwkw around 35psi with my 6466.   
    • Murray_Calavera
      iPad gauge cluster

      By Murray_Calavera · Posted

      First thought is to use a ram mount (to hold the ipad) + windscreen suction mount. The arms on the ram mount can be as long as you like, should be able to position the ipad pretty well with that setup. 
×
×
  • Create New...