Jump to content
SAU Community

Recommended Posts

depends on a series one yes but series two it's not worth the trouble. It can be done but it's better to got aftermarket.

Cheers

Neither serise 1 or 2, without that impediance thinggy (i was told)

RB26 & RB20 are top feed injectors,

while RB25 are side feed

i hope i'm right. :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/128086-gtr-injectors/#findComment-2398927
Share on other sites

Neither serise 1 or 2, without that impediance thinggy (i was told)

RB26 & RB20 are top feed injectors,

while RB25 are side feed

i hope i'm right. :)

True...

Both R33 S1 & S2 also all R34 GTT's (RB25det's) are low impedance side feed....

All GTR's are high impedance top feed....

HOT TIP:

Include some info like below.

What model GTR are these injectors???

How old are they???

How many km's have they done???

Have they ever been re-fitted???

All this info will help sell you injectors... :)

Link to comment
https://www.sau.com.au/forums/topic/128086-gtr-injectors/#findComment-2399978
Share on other sites

Okay for all to know

The injectors are out of a 1992 R32 GTR.

They have been cleaned, leak and flow tested .

On the paper work idea. I can get it but I will have to see the guy I bought them off.

Since they have been tested they have done 0 kms before that the injectors have traveled 83,900ish km's ( not 100 percent sure)

They have never been re-fitted I have had them since their testing and they have done nothing.

No time wasters

If you are seriously interested call me on 0406 046 136

Cheers

Claro

Edited by DRF72
Link to comment
https://www.sau.com.au/forums/topic/128086-gtr-injectors/#findComment-2404584
Share on other sites



  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG is has not responded to my emails so far after purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...