Jump to content
SAU Community

Recommended Posts

Yeah, he's doing very well for someone new to touring cars!

I wonder how much of it is having top level workshop support....its an interesting thing for the konica series...as more top level teams use it to get hopefuls up to speed, I think its really pushing out smaller teams who don't have the same level of budget and particularly data.

It's a little sad when good friends of mine such as Paul Dumbrell who drove an Ex Larry Perkins car last year and then Mark this year drive basically or fully level 1 prepped cars in a series that was made for the everyday guy ot get some sponsors together to go race a V8, not for level one teams to come in and win.

As far as i'm concerned, V8's is now about car speed rather than driver talent.... sad but afaic true.

I'll stick to F3 and open wheelers.

Well done to Mark anyway, he's a talent and a lucky guy to be where he is.

Later

Yeah, Dumbrell's car from last year was clearly the class of the field...not to downplay his ability either, but the level 1 supported drivers have a big advantage.

Still, both top level and konica series are very strong for competitor numbers, and more and more top level cars will be available with the wholesale changes to VY and BA cars in the main series.

still level one cars are being sold for hideous amounts of money....

i've seen some go for up to $250000.

How is the very day person going to affor that next year? when SBR or any level one team can just run their test car as the Konica car which is basically what their doing this year.

I still see it as a category that no Level 1 based team should be allowed to be affiliated with.

To Pauls crdeit, there were other Level 1 cars last year that he beat, which was good to see as Paul and I have raced together all the way through.

Honestly i haven't seen the results from KV8 series this year to see who has Level 1 cars, but i'm sure there wouldn't be too many as there were a lot of complaints about it last year.

Um,,,where should I start,,,,Mark and Jim did all of Marks karting on a very and I mean very limited budget. Mark is where he is NOW because of driver talent,,,nothing more nothing less.

Can't quite understand how SBR is using Marks car as a test bed,,,it's not a BA. Granted SBR is spannering for him,,,maybe we should put some balast in the car,,,then again whats Tod Wanless doing running a EL Konica car in sports sedans and now has it up for sale for $77000,,,just another loop-hole.

Marks never driven a race car with more than 110HP in his life,,,(shit he owns a GSR Lancer),,,nice work jumping up to 600hp on a full fuel load and having to use his left hand to shift gears.

Dumbrell,,,,pfff ask Paul Morris and Dean Canto about him sometime.

Neil.

  • 1 month later...

Well, he did it again at EC, I'm beginning to think he can drive a bit. Fastest in qualifying by.4s, pretty big gap.

Neil, I think there's 2 main benefits from being supported by 1 L1 team - setup data for all the tracks (except Wakefield) from their previous years, and better engineered cars (compared to the low budget, single car teams).

Still he's doing a great job, its hard to dominate such a close series.

Yep,,,he did excellent again Duncan,,,,The Kid needs launching help though,,,he just can't seem to convert front row starts into 1st corner leads.

Set-ups are really helping Mark get the Car sorted straight out of the transporter,,,,So where does that leave the likes of Dale Brede,,Paul Riciadello and a few others???.

Marks just simply a better driver.

Bring on the enduros.

Neil.

  • 2 months later...

Mark wrapped up the Konica series this last weekend at Winton (with a round to go),his qual time would have put him 10th in the main game....WOW he would have been in the shoot-out (for the 2nd time).

Now bring on the enduro's,,,,hmmm Sandown and Bathurst.

Ambrose/Ingall in Marco's car & Winterbottom/Noske in Russell's car.

Neil.

I know of a guy who drives in the konica series. He has an ex ozemail car and apparently he paid in the $250,000 region but gets support from ozemail. No motor racing is cheap. Id love to get involved in a F3 team one of these days but it seems very limmited here in Sydney. The national open wheeler series seem to be in a bit of a state at the moment here in australia. Look at the f3 Euroseries, that is some of the best racing in the world. Anyway, sorry to stray off the subject.

amazing eh, who has $250k to blow just on a race car? if you're running konica you're on the stay in Aus and race supercars plan not the doing openwheelers and gunna race F1 plan, so future earning potential is not outrageous.

Speaking of which, I was going to say in the F1 thread, but more appropriate here, I'm sick of racers making it to supercars coz dad the mildly successful racer bought the team for their son.

Good to see Winterbottom win without daddy owning the team.

I think having a dad who races and has money is the best way to get into the sport. Paul Morris's dad owns his team, the kelly brothers have very weatlhy parents who now own a team, that rodney forbes guy. I think there is a few others. Then again if it wasnt for parents like them who have the money to spend on motorsport alot of racing in Australia racing might not exist or be anywhere near as strong.

To go places you need either money or a bit of skill combines with luck. There are good drivers who needed money to get there and there are very adverage drivers use there money to get there. Mark did it working hard in karts and getting a break through the kartstars series. So he will be succesfull but im not sure what stone brothers are going to do next year. Three good drivers, hopefully they will either run three cars which i doubt or loan him to another team to use.

  • 3 weeks later...

Well nobodies really sure what Mark will be doing next year,,,there has been talk about Konica's again,,,but his car is/was sold,,,maybe Porsche cup on a lease plan and nothing about the Big Taxi's. Stone bros wouldn't won't a 3rd car in their team because that would mean 3 cars using the same gantrey in the longer races,,,Not good. So we will have to wait and see. What I do know though is Mark will be doing Sandown with Noske in Russell's car and then Konica's at Bathurst and also the big one with Noske again on Sunday. No quessing where I'll be that weekend.

Neil.

  • 2 weeks later...

Just a small note,,,Mark has been told to take no shiit off anybody at Malalla this weekend. Stone Bros haven't had to replace any panels while Mark's been driving so theres plenty of spares. If that means leaning on somone then so be it. He's never been a dirty racer,,but did cop a bit at Winton.

Neil.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
×
×
  • Create New...