Jump to content
SAU Community

Recommended Posts

Hi terry call captain thread on 0407077414 he will remove it for you. Tell him FOOLBOOST says hi :P

Excellent, thanks mate. Do you know how much $$$ roughly?

Do you know if this causes any boost issues?

if you're lucky, that exhaust port will still seal and there will be no change.

otherwise yes, of course.. you will get an exhaust leak which means there is less gas available to drive the turbo and your car won't boost as quickly.

The stud breaks because the leak was already there or because of an oil leak over the stud in question. So to answer your question - yes it will cause boost issues.....it will also effect air/fuel ratio readings. If one stud is broken you will be looking at around 4 -5 hours but the thread guy will not remove the turbo and manifold for you...you'll have to do it yourself or get someone else to do it.

just done mine lol worksshops charge 50 or more per stud to fix plus gaskets lol and so on..

i done myself they suck,,need small air drill if have some snapped of...

replace all of them if doing not worth doin 1 or 2

goodluck

captain thread is the MAN!!! he has gotten mine out twice, when i broke an easy out stud extractor off in the broken stud aswell...

cost a bit over a hundred $$ EACH. but i was so frustrated i had no other avenue. He has a mobile service which is very handy

VOTE 1 CAPTAIN THREAD

ive had this same problem, and now i got an oil leak from the head behind the stud.. i called a thread proffesional to fix it, and its still leaking, is there anything i can use to seal this leak properly? rather then replacing the whole head?

i've heard of exhuast studs breaking on many skylines. it was probably a techline in japan

they break because the inline-6 manifold is long, and has a turbo hanging off it. the weight and flexing from repeated heat cycling gradually fatigues the studs.

I had at least 3 snapped studs when I pulled the manifold off my R31 (was upgrading the turbo and figured I should do the studs while it was apart). I didn't suffer from any exhaust leaks either.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
    • To re-cap, I bought: https://www.alibaba.com/product-detail/Lsailt-8G-Infiniti-Q50-Q60-2014_1601171829627.html?spm=a2756.trade-list-buyer.0.0.2cd476e9FTIlKE As you can see, if I bought 20 it was $653, but I bought 1 so it was $1,170. I was very tempted to buy 2 and resell 1 at 25% cheaper. @MBS206, I am not sure if they do a Kluger one, here is their list but it might be there under a global model name: http://www.lsailt.com/product/android-interface?page=1 Keep in mind these full android replacements have basically all the bits a phone does (cpu, ram, storage, wifi, bluetooth, usb interfaces) other than a screen (it uses a host), thus the $800+ cost. Android Auto screen mirroring is MUCH cheaper as it's just a cut down shell, input mirroring and output mirroring BTW I also need that "screen off" feature, it is much harder to see wildlife even if a dash is reasonably dark. Both the Fuga and V37 have display off buttons for night use, they just come back on for a second or 3 if you interact with it, eg skip a song.
×
×
  • Create New...