Jump to content
SAU Community

Recommended Posts

NOTICE FROM SQUIZZ: I have condensed all Doc's threads to this one...

1) Current Model Blue Screen APEXI Rev Speed Meter with optional G-Sensor. For the huge list of specs that this unit can do check out www.apexi-usa.com

I have also printed and bound the complete english manual, and installation instructions.

2) Blitz SSBC - Street Spec Boost Controller. This is an electronic boost controller with dual high low in cabin variable dials and high low switch.

3) I'm selling the turbo of my RB20DET. The turbo is in good condition with no play in the shaft.

4) My mechanic has told me my big end bearings are gone. There is a slight rattle in the motor, but it still make excellent power. If anyone is interested in any parts of my motor I believe the head is still in excellent condition, and so is the bottom end apart from the bearings.

The motor is still in the car if you'd like to hear it running?

5) Due to pressing financial needs to get my car repaired I am offering excellent rates on all types of auto-electrics, and accesory installations.

Please e-mail or call me if you would like an estimate or some work done.

PLEASE HELP I NEED RED R32 BACK ON THE ROAD.

[email protected]

or

0411 878 961

Sam

Thanks anyway Da_Man, I did say reasonable offer, but I suppose it's a start. This unit is as new. I was hoping for more like $400 or $450 installed.

Any other offers?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...