Jump to content
SAU Community

Recommended Posts

Top right of the screen where all the buttons are there is a white and blue one that says OP. Click it for options fitted to vehicle. A lot of older vehicles will show jibberish... newer ones will be in engrish.

Thanks Psymon, just comes up with lots of pages of Japanese.

Bis-e Bee - That VIN doesn't work in my version of FAST, but I think my data might be fairly old and may not have stags in it. Either that or Im doing something wrong. Im new to all this.

Thanks Psymon, just comes up with lots of pages of Japanese.

Bis-e Bee - That VIN doesn't work in my version of FAST, but I think my data might be fairly old and may not have stags in it. Either that or Im doing something wrong. Im new to all this.

You're probably doing it right, the versions of FAST floating around on the internet are fairly dated and seem to be missing a lot of VIN data. I work for Nissan so my version of FAST gets regular updates.

Someone please FAST this one for me, I am running 64bit windows and cannot get it installed :(

NM35318296

See attachment.

post-20417-0-47437800-1294963122_thumb.jpg

You're probably doing it right, the versions of FAST floating around on the internet are fairly dated and seem to be missing a lot of VIN data. I work for Nissan so my version of FAST gets regular updates.

See attachment.

Thanks Psymon, much appreciated. Could I also trouble you to do an options screen shot?

This one was supposedly factory fitted with "some" Nismo options, just wondering if that is genuine.

It's currently got Nismo wheels, bodykit (including rear wing), Momo steering wheel, I assume suspension too but havn't had that closer look yet.

Thanks again!

Hi all,

could someone run these part numbers in FAST and see what it comes up as (if at all)

nissan part#

98584 77F00

98584 26U00

98584 20U00

one of them hopefully should be an srs aibag module for a type x 180sx... But not having much luck so far..

Cheers guys

Edited by Yeedogga

Hi all,

could someone run these part numbers in FAST and see what it comes up as (if at all)

nissan part#

98584 77F00

98584 26U00

98584 20U00

one of them hopefully should be an srs aibag module for a type x 180sx... But not having much luck so far..

Cheers guys

None of those numbers worked for me. Had a quick look and there's 3 numbers for drivers airbag module to suit a type x 180sx. If you can grab me a VIN from it I can narrow it down.

Sheeeit, how do I google translate a PDF?

Well I uploaded it to this site that converts it to text so it will be easy to run through google translate easily. I'll post the link up here when it's done.

Edit: Hmm didn't end up working how I'd wanted, back to square one :(.

Edited by miguelegant

Probably better off finding the ones that correspond to your VIN and just translating those few lines rather than having a crack at 8 pages.

There should only be 4 lines that apply for each model code.

Edited by Psymon

Characters 14 - 18 (in your case HCDBA). I got really bored so i did yours.

16 Inch Aluminium Wheels

Sports Rear something (kept translating as interface or boiler... maybe spoiler??)

Sports Seats (i think) + GTS25T(more jibberish)

something about Stereo Components

Passenger Airbag

Here is the original 5 descriptions if anyone wants a crack at translating better. Not sure if the forums will display japanese characters though.

16インチアルミホイール

リヤワイパー+リヤスポイラー

ポーツシート+GTS25タイプS/S(4ドア)

コンビステレオ

助手席エアバッグ

Edited by Psymon

Characters 14 - 18 (in your case HCDBA). I got really bored so i did yours.

16 Inch Aluminium Wheels

Sports Rear something (kept translating as interface or boiler... maybe spoiler??) Would probably be spoiler as it has one.

Sports Seats (i think) + GTS25T(more jibberish) It's a non turbo so I dunno.

something about Stereo Components

Passenger Airbag Yeah

Here is the original 5 descriptions if anyone wants a crack at translating better. Not sure if the forums will display japanese characters though.

16インチアルミホイール

リヤワイパー+リヤスポイラー

ポーツシート+GTS25タイプS/S(4ドア)

コンビステレオ

助手席エアバッグ

Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
    • Hi Everyone I am from West Pennant Hills in NSW. Been too busy until recently to attend to my RB25DET Series 2 engine until recently. I am planning to stick it into the S15 shell at this stage, unless a nice SR20DET turns up... For now, i am going to try and get the RB25 running and working well then decide what gearbox to use. My preference is to retain the SR20DET  6 speed gearbox and tail shaft to retain as much and least modifications as i can avoid. I am an old guy and won't be doing any heavy drifting so i don't need a bullet proof gearbox Does anyone have experience with starting the RB on a stand? I got everything setup as much as I can with the info i can find... endless searching and videos on Youtube I would be great to get some pointers Cheers Songo
    • Hey all, Recently have had my s1 r33 gtr serviced and noticed my coolant reservoir was topped up to the max line. Took the car out for 1 yesterday and noticed today the reservoir is completely empty.  Any ideas? Radiator is full
×
×
  • Create New...