Jump to content
SAU Community

Recommended Posts

  • Replies 128
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I plan for it to be an all round car, street, drift, drags, track, and shows.

I've had the car only 12 months, mite take a couple of years but thats the intension to build an all rounder.

I have coil overs and wheels comming next month.

The car is currently sitting in the workshop , im completing the next series of modifications.

  • 1 month later...

Bit of a decent update,

Im going to include alot more pics this time just to give you guys an idea on how much work goes into getting things perfect. So much work goes into aftermarket products to make them fit like oem products.

Heres a few pics of my cf boot, the carbon has been laid perfect but the underside moulding was terribly out of shape cause the boot to fit okay but nowhere near the standard I want to achieve for this car. So i had to cut and remove the shape out of the boot and remould it to fit perfect, this took hours and hours of work to get right. What I ended up with is a perfect fitting cf boot which is really hard to get.

Reshaping of the boot, this was only the first stage I didnt get pics of the next stage.

nov3.jpg

Filled and primed

nov1.jpg

Finish coat, still had a few coats to go but you get the idea.

nov.jpg

Boot completed.

Okay heres a bunch of pics where I am up to atm including the new front bar. Gives you guys an idea why I chose the black over the orange! Please feel free to comment

dec1.jpg

dec2.jpg

dec3.jpg

dec4.jpg

dec5.jpg

dec6.jpg

dec7.jpg

dec8.jpg

Just a tip i found with taking pics of my car in sunlight; as your car also seems to have a pearl.

With my camera i have to press the button half way to focus, then continue pressing it to take the photo. If yours is the same, try to focus on something lighter (whiter) that is roughly the same distance from your car, then turn the lens to your car to take the photo. I found that the pearl "fools" the camera and the pic ends up over exposed.

Just to show you an example, i've added two pics of photos of my car.

This first i focused on my car, you can see the shot is totally over exposed. Have a look at the white 33 in the left corner, and the sandy gravel.

post-1811-1167219306.jpg

This second pic i focused on the white car, and i prefer to see my paint colour in this type of shade.

post-1811-1167219333.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...