Jump to content
SAU Community

Recommended Posts

I know this topic has been heavily discussed before, but I couldnt help noticing that a great number of you have sydney kid suspension on your wish list of future mods....can someone please tell me what make/brand these are? adjustables or lowered springs on aftermarket shocks?

I dont know what suspension components are installed on my rs4, came lowered from japan...but currently it rides like a brick....not really ideal if you're crusing on a full stomach.

Link to comment
https://www.sau.com.au/forums/topic/129328-suspension-upgrade/
Share on other sites

http://www.skylinesaustralia.com/forums/in...showtopic=53079

simple, Sydneykids specs involving Bilstein shocks and Whiteline components (springs, bushes, swaybars etc). I went without the springs (using standard) and find it a most suitable ride.

edit: to lower it or raise the suspension, SK had "notches" scrapped into the shocks, and you can adjust the height simply using circlips. pretty much they are lowered springs on aftermarket shocks

Edited by Tangles
http://www.skylinesaustralia.com/forums/in...showtopic=53079

simple, Sydneykids specs involving Bilstein shocks and Whiteline components (springs, bushes, swaybars etc). I went without the springs (using standard) and find it a most suitable ride.

edit: to lower it or raise the suspension, SK had "notches" scrapped into the shocks, and you can adjust the height simply using circlips. pretty much they are lowered springs on aftermarket shocks

Sorry to steal the thread but it seemed like a logical place to ask...

What colour should the bilstein rear shocks be?

The ones in pictures I've seen are yellow whereas I've had mine replaced under dealer warranty some time ago and was told they were bilsteins, yet they are black. They are definitely new though and provide a very comfortable ride.

Sorry to steal the thread but it seemed like a logical place to ask...

What colour should the bilstein rear shocks be?

The ones in pictures I've seen are yellow whereas I've had mine replaced under dealer warranty some time ago and was told they were bilsteins, yet they are black. They are definitely new though and provide a very comfortable ride.

Genuine Bilstein shocks have "BILSTEIN" machine into the shock body along with the part numbers. Thye are usually down near the lower shock mount.

:devil: cheers :down:

http://www.skylinesaustralia.com/forums/in...showtopic=53079

simple, Sydneykids specs involving Bilstein shocks and Whiteline components (springs, bushes, swaybars etc). I went without the springs (using standard) and find it a most suitable ride.

edit: to lower it or raise the suspension, SK had "notches" scrapped into the shocks, and you can adjust the height simply using circlips. pretty much they are lowered springs on aftermarket shocks

wouldn't cutting threads into the shock body compromise the strenght of the overall assembly?

wouldn't cutting threads into the shock body compromise the strenght of the overall assembly?

Nope, Bilstein Skyline shocks come with circlip grooves standard, the Group Buy simply adds a few more. The shock body is designed for that purpose.

:wave: cheers :D

Edited by Sydneykid

Well seeing as though we are asking questions in here, and I dont want to muddy up the ongoing thread....

Can someone explain to me this approx 10mm rake effect... From what I can deduce if you wanted a 10mm rake effect for the nose down... wouldnt you then want the distance from the centre of the wheels to the wheel arch on the front to be 10mm less then the distance on the back wheels? I find it confusing because everywhere I am reading of this nose down rake effect and the measurement are always higher on the front and not the back...

Please help a poor confused man :wave:

Well seeing as though we are asking questions in here, and I dont want to muddy up the ongoing thread....

Can someone explain to me this approx 10mm rake effect... From what I can deduce if you wanted a 10mm rake effect for the nose down... wouldnt you then want the distance from the centre of the wheels to the wheel arch on the front to be 10mm less then the distance on the back wheels? I find it confusing because everywhere I am reading of this nose down rake effect and the measurement are always higher on the front and not the bad...

Please help a poor confused man :wave:

The front and rear guards openings are not "cut" to the same height. The rear guard opening is in fact ~15 mm lower than the front guard opening.

Hence, rake is best measured at the sill (just behind the front wheels and just in front of the rear wheels), that's where the 10 mm nose down comes from.

:D cheers :(

Thanks sydneykid. I'll email you when its time to change the shockies on my car. right now i'm saving up for a FMIC and SAFC (will have to do this on the sly coz my wife has a tight grip on finances at the moment)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...