Jump to content
SAU Community

Recommended Posts

Guest 40th-edition

Pinging is the engine detonation the fuel to early on the stroke causing the noise!

such as if u use unleaded instead of premium.. when it goes hot the fuel will pre ignite and cause this.

u will hear a noise like a knocking or loud buzzing or how ever u want to describe it.

to resolve it try using a higher octain fuel.. or u can get an addertive which helps (its pritty much octain)

u should beabe to notice it when u r reving high and if the engine makes a weird noise.. ushaly atr high revs ( around 5000 depending)

hope this helps!

Link to comment
https://www.sau.com.au/forums/topic/129541-what-is-pinging/#findComment-2395908
Share on other sites

Ping is pretty much a shortened term for PRE-IGNITION. I kinda sounds like a shaker in a spray can but more dull. As above but a few things to add.

Pinging can be caused by ignition timing too far in advance, hot spots in the cylinder head (usually caused by dodgy porting), lean fuel mixtures or not enough octane rating in the fuel being used. All of these things can cause the fuel/air mix to pre-ignite.

To rectify it you need to find out which one is causing the problem and alter it. Most of the time it is poor fuel quality or ignition timing. You will find that it will ping more so when the engine is producing most of its torque so it will disappear before 6000rpm most of the time.

Link to comment
https://www.sau.com.au/forums/topic/129541-what-is-pinging/#findComment-2395957
Share on other sites

uneven combustion causing hot spots and percusion on the pistons-can be caused by many factors or combination of these-will result in the end of an engine if it continues over time. Warning - an engine can be knocking and you wont detect it with the human ear so always have it tuned correctly by a pro. So many backyarders chuck on a big turbo and other mods then shoot the boost through the roof and drive around without a good safe tune on it-then Ka Boom...wallet deflates :D

Link to comment
https://www.sau.com.au/forums/topic/129541-what-is-pinging/#findComment-2395981
Share on other sites

Can also have piston knock, caused by too loose clearances when an engine is rebuilt, and just under load the piston can rattle on power stroke, even when fuel is good quality and timing isnt too far advanced. So having a good tight engine helps keep that form of knock to a minimal level.

Our old rb25, destroyed the ringlands off std pistons, and we had a race meeting the next weekend...out she came quick rebuild with some acl forgies and new bearings and usual crap, went for tuning and it wouldnt stop knocking, take all the timing out, loads of fuel no boost and it would still knock. go figure.

Link to comment
https://www.sau.com.au/forums/topic/129541-what-is-pinging/#findComment-2397310
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...