Jump to content
SAU Community

Recommended Posts

Just wondering if anyone had been today and if it was worth while?

I can't talk from experience of being there, but got a message from a mate that reckons some of the dyno runs were interesting. Some 200sx putting out over 400rwkw and an R34 about 288rwkw

I can't talk from experience of being there, but got a message from a mate that reckons some of the dyno runs were interesting. Some 200sx putting out over 400rwkw and an R34 about 288rwkw
I guess your friend didnt stick around to see the R34 (CRD's RH9) to go on to make 600+ atw :(. If all goes well for Sunday they're planning to run again this time with the giggle gas on.

edit: That 200SX (S15) would've been GT Autosounds drag car.

Edited by pkblade
haha waited soooo long to see RH9 run on the dyno, but got bored after about 20mins of them farting around :\

trust me...as a expat South Aussie now residing in the ACT...this thing is the REAL thing ..you will not be

disappointed, he is going all out today... :thumbsup:

Went an had a look today, didn't mind it i guess. Enjoyed having a look at the various small club displays & the couple of drift cars. Tend to appreciate them more as their driven/thrashed, compared to trailer queens. :thumbsup:

Not really worth $18 tho i thought, bit steep but hey. :dry:

Hey sorry to say but i thought auto salon this year was shit ive been every year for 6 years and this year i didnt like the car quality was nothing compeared to last year and the year before what happend to donny,s s15 and all the other greats but everyone has different taste so yeah some may like it same may not.

Oh and that guy that drives LUSHES RX7 what a tool bag he is he has an attitude problem what a wanker.

i went 2day, was alrite, some nice cars, i rekon would make it better if they had more ppl around talking about the cars n stuff, cos like when i went 2 look at a car the guys would just stare at u like 'y u looking at my car for". saw some ncie dyno runs...yeh that 34 gtr from act was fkn crazy.

no1 mentioned the nice looking girls...i ran into ppl on several occations cos i was staring at the hotties..lol

ronny (owner of lushes) is actually a really nice guy, dunno what you guys are talking about though.

MYSHOW S15 was the roughest show car on the scene the car was hardly a "show car" IMO it was more of a slap together.

It's not a R34 it's a R32 with the R34 front

WTF are you smoking?

Edited by 2GU UP
ronny (owner of lushes) is actually a really nice guy, dunno what you guys are talking about though.

MYSHOW S15 was the roughest show car on the scene the car was hardly a "show car" IMO it was more of a slap together.

WTF are you smoking?

I saw an R33 with an R34 front? Was all by it's lonesome self. Would have cost abit however. Was a few nice cars there, didn't see too much on the dyno as 1) wasn't enough 'seeing' positions (put some proper stands up would have been a good idea), 2) took a little long to setup and switch

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...