Jump to content
SAU Community

Recommended Posts

Here is mine, nice and clean again (rain makes it look a bit dirty)

Skirts are fixed and back on - finally - only took me 2 years to get around to doing.

Any idea what side skirts I have? They are different to the stock ones I have seen as these wrap around underneath where the door closes.

gtr style rear pods right? i think i might get some as an alternative to changing the whole rear bar

I lvoe that gtr GODZLR. Very nice Matty P. Got any engine bay shots?

0-0-web.jpg

Took this photo a few months back in my garage, and depetched it.

Not a fan of the polish cover as it gets dirty pretty easy, so it will get airbrushed eventually down the track in purple with some sort of design on it (inspired by TOP RPM engine cover).

Will replace those ugly green hoses too & got a Trust oil filter relocation kit for it, yet to be installed though...plus some other goodies lined up to finish it off for now.

Edited by MattyP
Here is mine, nice and clean again (rain makes it look a bit dirty)

Skirts are fixed and back on - finally - only took me 2 years to get around to doing.

Any idea what side skirts I have? They are different to the stock ones I have seen as these wrap around underneath where the door closes.

re: your sideskirts... they're just replica GTR ones.... they're simple, but i think they look tough... i got the same.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
×
×
  • Create New...