Jump to content
SAU Community

Recommended Posts

rb20's are fullly sick

except for the externally gated ones. they're gay.

anyways

r32 - 2530 - 12psi - bilstein suspension - power fc (me)

r33 - stock turb - 10-11psi - stock suspension - stock ecu (liz)

=

@ oran park

r32 just keeping infront of the r33

alittle more work i think is needed for the r32's to keep up

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

rb20's are fullly sick

except for the externally gated ones. they're gay.

GAY? I cant bite in fear of posting some offensive red neck comment that i dont really mean ...but there is something wrong in the heads of ppl running external gates :)

...and we all know this thing would slaughter both a lion and unicorn

Pfilm1383836879018.jpg

GAY? I cant bite in fear of posting some offensive red neck comment that i dont really mean ...but there is something wrong in the heads of ppl running external gates :P

...and we all know this thing would slaughter both a lion and unicorn

Pfilm1383836879018.jpg

just having a stab in fear of the rb20's with external gates destroying my pissy turbs :(

but it is true when those external gates open..... brilliant i say!

When are you GTR guys going to come to terms with the fact that your cars plain suck! :D

...lol and when are ppl going to stop comparing them? A neat GTSt will be a good all round car. A std GTR is a good all round car. From what i have seen a GTR doesnt have to be very modded to be an even better car, as the factory gave the thing pretty good gear from the start.

...doesnt change the fact that GTR owners have to use velcro shoes because they struggle with shoe laces :O

:laughing-smiley-014:

RB3026 > all :)

Err, then how is it that a r32 gts-t with a 33/34 turbo on it, is faster than a gtst 33 or 34 with the same turbo and more technology? Assuming that 33/34 gts-t's run something like mid 14's in the quarter and your average 32 with a 33/34 turbo on it and minor mods will hit low 14's, maybe high 13's

Also, 32 gtr's hit, 13.3, 13.2 ay?

(the last page of this topic belongs in the wasteland -_-)

Edited by r32 gts-turbo
rb20's are fullly sick

except for the externally gated ones. they're gay.

anyways

r32 - 2530 - 12psi - bilstein suspension - power fc (me)

r33 - stock turb - 10-11psi - stock suspension - stock ecu (liz)

=

@ oran park

r32 just keeping infront of the r33

alittle more work i think is needed for the r32's to keep up

Georgey boy,

you can't compare the two, those times come down to driver experience and ability, if you want to go that way, i fried your ass in a total stock standard r33 gtst, and again at wakie.

Oran_Park_GP_29_April_06.txtwakefield_pk_2nd_july_06.txt

nathy boy

obviously your driving ability out does mine....... quite obvious!

so i was using liz as an example because i would say her ability and mine are similar. Dont you think??

As your pointing out she should of whipped my ass if she was at your level? right?

and i was refering to the aaron mcgill day not long ago not the renew day @ oran park.

my previous comments were based on the fact that two similar drivers in an r32 and a r33, the r32 would need more to keep up in my opinion. i think you took my post the wrong way mate. just have another read of it

werent u running semi slicks???

cheers

George

nathy boy

obviously your driving ability out does mine....... quite obvious!

so i was using liz as an example because i would say her ability and mine are similar. Dont you think??

As your pointing out she should of whipped my ass if she was at your level? right?

and i was refering to the aaron mcgill day not long ago not the renew day @ oran park.

my previous comments were based on the fact that two similar drivers in an r32 and a r33, the r32 would need more to keep up in my opinion. i think you took my post the wrong way mate. just have another read of it

werent u running semi slicks???

cheers

George

Sorry George, the thread is about rb20vrb25vrb26, useless if you ask me but people can't help themselves, mate the renew trackday was my very first time on a track!!! in any car and wakie only my second. No i wasn't running semi's at oran park but at wakie yes. to tell the truth i think your car should be faster as being lighter of the two and with mods. Stock for stock no i don't believe the rb20 is better or the rb25 better then an rb26, but if you mod the rb20 the right way it will be quicker than an stock rb25, you could also apply it to an rb25 over rb26.

but i my opinion dollar for dollar with same mods and tuning no rb20 will beat an rb25 and same with rb25 to rb26.

Screw the unicorn or whatever other animal you can think of.

If an rb20 wants to beat any other engine possibly known to man it needs help, and the help it gets is from the hippo, dance dance dance boys and girls and the hippo PWNS you.

hippo.gif

I was actually pretty impressed with my little mildly modified Rb20det.

It only made 164rwkw running 1bar of boost with an exhaust & fmic.

Up and rolling it was as quick if not a bee's dick quicker than a 100% stock R33 GTR. Now thats not bad really..

It also never ever had issues and never had an R33 with the exact same mods beat it. My little R32 was always a little quicker.

A mate at the time had an R33 with the same mods but obviously making more power than I. His car clearly weighs more and has longer gearing. Driving the R33 vs driving my little R32 the R32 won hands down, it was so much more fun to drive especially when boost snaped on hard exiting a corner in second. He even stated the R32 felt quicker, and it was. :mad:

All though for some reason these days there appears to be quite a few r33's pushing 200rwkw on their stock ecu, back then it didn't happen. Most likely different dyno software or something.

Once you pass those first few mods the R32 gets left behind. They require a turbo upgrade that increases lag and makes the car just that little bit harder to drive.

I've never been in Roy's but from the dyno graph it does look impressive, looks like it has that 'fun' factor. :stupid:

An example is the crude power to weight.. Lets go with 1550 for the gtr and 1320 for the 32 gtst. The gtr needs ~30rwkw more in order to achieve a similiar power to weight. An R33... Needs roughly 15rwkw more than the 32 to achieve a similiar power to weight. Thats going off the 33 weighing in at 1415kg's. A friend had his on a weigh bridge some years ago. Power to weight comparisons are crude as, I don't like using them but it does help bring the weight issue in to perspective.

In conclusion the Rb20 will never make power easier than an rb25 or rb26 for that matter. The advantage it has is Nissan tied it up in a lighter car with shorter gearing that all works in its favour.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So now doing the change and first time dealing with rb so little nervous giving engine power and potential for screwing it up When you align all marks and then remove crank bolt, timing move little I assume you can put the bolt back in once you have removed the pully to get timing to where you want?   here is pic of my both intake and exchust cam aligned, depending on angle you look they seem to be either aligned or a half tooth or so out. Any thoughts? Should you angle your face and look at each mark that way as if looking straight rather than from above as it can be misleading   <a href="https://ibb.co/ZpnhcvbF"><img src="https://i.ibb.co/HfWrGR9b/IMG-4447.jpg" alt="IMG-4447" border="0"></a> <a href="https://ibb.co/4wm2wn4q"><img src="https://i.ibb.co/JWBqWwr1/IMG-4445.jpg" alt="IMG-4445" border="0"></a>   https://ibb.co/ZpnhcvbF https://ibb.co/4wm2wn4q
    • Thanks for the reply @GTSBoy Haven't really thought of that yet, but you are right. If the hose was damaged it should be absolutely pissing by now. I'll put some heat sleeve around it for good measure since I'm already removing the line anyway.  Maybe I'll put on some of the stock hardlines if I ever fully remove the turbos again. Maybe when T51R modding the compressor housings? Might be a fun mod on GT28s for that "fake single turbo" effect.
    • Update 1: I did some work on the car already before finalizing this post and my "issues" list. I dropped the Tomei exhaust in favor of the HKS Hi Power Silent. Sounds nice and I can actually hear myself think now. Also gives me a realistic chance to legally drive without silencer inserts. A bit of cheating was necessary to still be able to mount the Top Secret style diffuser. Some malusage of washers and a bit of "convincing" toward the brackets and exhaust hanger seemed to do the trick. The shaky steering wheel has been resolved as various suspension components were worn, like sway bar bushings and link bars. Most notably the two steering tie rod ends. Had some trouble finding bushings because my sway bars are not OEM thickness, 23.x up front and 27 rear. But non adjustable, so no aftermarket I suppose. Maybe they are nismo units? Turbo oil drain hoses were definitely still the originals and are new now. Wasn't the cause of the turbo oil leak sadly. Currently removing the rear turbo because of it, I suspect the braided oil feed line is the culprit. This issue needs to be dealt with so I can work towards actually getting the turbo setup legal and inspected. Two new issues to add to the list as well. Rear Main seal is probably leaking. Time will show how bad it is, I don't really want to drop the gearbox right now just for the stupid seal. Could fix a few other things in one go once I do that. Front right driveshaft grease is going past the cv boot, so at some point I'll fix that too.
    • Ok so no 4cyl clutch... Yeah it is a factory manual. So if iam correct i need clutch and flywheel too? I can use something that suits something like R32 GTST?   EDIT: https://www.ebay.com/itm/224291042776 Is this ok?   EDIT2: i maybe forget to mention this(dk how important it is) but the trans will be behind RB25DET NEO(iam doing swap) It will be there for a little while. Iam planing to do bigbox or BMW tranny..
    • You're probably right about that one. Thanks for your suggestions, I hope I don't need a new 3rd brake light. Although wiring issues might arguably be worse. Right now I'm in the midst of a turbo removal because of my oil leak, other problems are going to have to wait for now.
×
×
  • Create New...