Jump to content
SAU Community

Recommended Posts

its worth a try. as from what i can see its the same symptons and where running out of things to check lol

Have we tried checking the brains we have? ....Always wanting more power and how to get it.

After you set this up and launch at about 6000RPM you will almost do damage somewhere.

The :rolleyes::thumbsup::( next weak link i suppose... gear box, clutch,flywheel,diff.. Who knows what Aarons next problem will be?

There has to be some supporting mods other than what you have to be able to put this much power on the road.

Please post up the dyno results on the RB26 Dyno results listing all your mods.(once you have sorted yourself out)

Good luck

  • 1 month later...

took my car in today to get it re dynoed and hit bit of a problem it was boosting anything past 0.7 bar...just read the link TO4 put done will have take that damn EVC in the exhaust out and hopefully sovle my problem, which another was brewing the the way home, the seal in the clutch operating cylinder shyte itself as all my clutch fluid hit the road i was left wondering how do i get home now :)...phone call later to a mechanic friend got me going again..start the car in 1st n just take off , lucky was only 2 min from home.

Car booked in again for tune next friday hopefully will be ok for the track day on sunday!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...