Jump to content
SAU Community

Recommended Posts

---update----

Advans sold,

Nismo rims sold pending payment. other bits still available, offers considered

---------------

Hi,

Both sets are from R32 GTR's one set is currently on the car (Nismo).

One set of 17 inch ADVAN racing rims in gold. slight marks where the wheel nuts are put in otherwise perfect, as new. Comes with a full set of wheel nuts and very thin spacers that were on the car. Rubber: 2 brand new, 2 roadworthy but used(just put on for the car to pass rego). $1,900 or best offer. I was told they are worth over 2k but havent seen any others for sale so if this is unreasionable please let me know or make an offer, would also consider stock rims + cash.

NISMO 18 inch rims, white, made by rays engineering, genuine 2 party alloys. rubber passed RWC but not by a lot on the fronts. There is some scratches around the edges on all rims but it is not much deeper than the paint so would be cheap to repair if required. need to have wheels on the car so these would be trade for your rims plus cash if someone is interested.

ADVAN's:

post-21158-1156415183.jpgpost-21158-1156415352.jpgpost-21158-1156415430.jpg

NISMO Rims currently on car:

post-21158-1156415512.jpg

I also have:

brake master cylinder brace, anodised blue colour and

set of suspension, 2X vielside evolution height adjustable for the rear and 2X TIEN height adjustable for the front but I removed them from my previous gtr as the front TIEN's need refilling/seal after one started leaking. PM or post here if interested and i will upload pics and details.

contact:

(02)66333131 (martin) or

email: [email protected]

or just PM as i check almost every day.

pick up is prefered (Kyogle, near LISMORE in northern NSW) but i can arrange courier if required.

thanks for looking and please let me know if more info/pics is required.

martin

Edited by mmarschall

how much do you want for the nismo wheels? Width and offset please.

iv got a set of 16inch 2 peice wheels from 32 gtr with new tyres that im might trade. or give me a price outright and you can put the other ones on for the moment

Hi,

Sorry PranK, prices for all:

ADVAN's: $1900

NISMO's: $2500

Suspension: withdrawn from sale until someone can tell me what a reasionable price is or what it would cost to refill the 2 TIEN's?

Master cylinder brace: um, $200? if anyone can send me a link where i can find one for sale so i can beat the price as i have no idea on this one!? (will add a pic soon)

Also have a used brake master cylinder and booster which were from a wrecked GTR32, paid $250 for both, so start with that for a price, happy to seperate, offers considered

NEW Front Bendix Ultimate brake pads bought for a R32 GTR. paid $160. $130 ono (part no: DB1170 ULT)

To answer the questions on the rims size, the ADVAN's have the sticker pictured inside... no other details on them that i can see. The rubber is 235 but when i had it fitted the shop told me the rims are made for 245's (the 235's do stretch a little but are legal). offset? well they fit fine on an R32 gtr! can anyone tell me how to measure that? All 4 seem to be exactly the same size (no visible difference and tape measurements were identical

The NISMO rims have stickers (will post a pic shortly) with 18 X 1.0, of.+20, PCD 114.3 and "RAYS ENGINEERING" on it. Again all rims are the same size as far as i can tell but they do have different tyres front and back (255's on the back that stretch a bit and 225 or 235 (cant remember) on the front that are REALLY stretching to fit...).

thanks,

martin

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...