Jump to content
SAU Community

Recommended Posts

hey guys, i'm picking up my skyline from melbourne tonight, however he's been told he needs an Airbox on for the RWC.

Now i can't borrow his mates one here in Canberra.

The quesiton is, am i likely to get pulled up on it here in Canberra at Dickson? Is there someone i can talk to about getting it sorted out here?

Link to comment
https://www.sau.com.au/forums/topic/131655-vehicle-inspection-in-act/
Share on other sites

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

Should be fine.

I would be more worried about the front mount intercooler to be honest.

Although me and my mate went thru dickson with his car with a massive front mount and no reo bar and a massive mouth cut out of the front bar and they didnt really care..

As long as your not too loud and your ground clearance is ok then you'll be sweet.

I just past my rego today ;):D:D and i have FMIC, pod and some other things. All you need is to get a rego inspection before you go over the pits at dickson. Try paul whyte automotive in gungahlin, very good. If you need to quite down your exhaust let me know as i have a custom quite piece of shit but already put my cannon back on :D.

I just past my rego today :laugh::D:D and i have FMIC, pod and some other things. All you need is to get a rego inspection before you go over the pits at dickson. Try paul whyte automotive in gungahlin, very good. If you need to quite down your exhaust let me know as i have a custom quite piece of shit but already put my cannon back on :P.

Rego? or interstate move?

My "cockpit" looks like so

broominside.jpg

Is the PFC Hand Controller and Boost Controller going to cause "dramas"? Should i hide them (or disconnect totally for the inspection etc..)

Regarding Exhaust Noise, unless someone pushes past about 3 - 3.5k you are never going to notice it. Lovely piece of work.

I just past my rego today :laugh::D:D and i have FMIC, pod and some other things. All you need is to get a rego inspection before you go over the pits at dickson. Try paul whyte automotive in gungahlin, very good. If you need to quite down your exhaust let me know as i have a custom quite piece of shit but already put my cannon back on :P.

Rego? or interstate move?

My "cockpit" looks like so

broominside.jpg

Also will the steering wheel cause any problems?

Regarding Exhaust Noise, unless someone pushes past about 3 - 3.5k you are never going to notice it. Lovely piece of work.

Edited by nsanity

Hide the PFC hand controller and remove the pictures from the forum.

Aftermarket ECU's are a big no-no... sometimes they will get you for it, other times they wont.

Steering wheel will be fine as long as its secure and it wasnt an airbag model and has had the airbag removed.

Edited by Amaru
Steering wheel will be fine as long as its secure and it wasnt an airbag model and has had the airbag removed.

Doesn't the boss kit have to be collapsible or something? At least I remember hearing something like that

I thought the only requirement was a collapsable steering column which Nissan built in factory (as every other car does). Could be wrong though :P

I do remember going over Dickson though and horn button was removed to confirm the wheel had been bolted on properly.

Rego? or interstate move?

Regarding Exhaust Noise, unless someone pushes past about 3 - 3.5k you are never going to notice it. Lovely piece of work.

Both, i had to change it to ACT and also register it in my name.

They reved mine on 3k for about 5 seconds when i got my RWC. He said it might pass but when i got to dickson they were like "nope too loud".

Edited by steves180

Why did you have to go to Dickson to get inspected?

According to the ACT RTA site all you need to do is visit an authorised inspection station and then pay for your rego.

I am in the process of buying a car from NSW and it has rego in NSW for 10 months.

I want to cash what there is left of rego in nsw and re register it in the ACT. but when I checked on the rego site all it said is take it to an authorised inspection station and get it pinkslipped and then pay at the act shopfront.

I thought that all private imports/modified vehicles have to go to Dickson, only standard cars can get away with going elsewhere.

By modified I mean modified and requiring an engineer's certificate

Please note that, vehicles over 4.5 tonne GVM, public vehicles, modified vehicles, imported vehicles or vehicles without compliance plates MUST attend the Dickson Motor Registry.

There was a discussion about this recently. To the letter of the law it must go to Dickson, but some staff at the motor registry/canberra connect arent really aware of this rule which is why they say take it to any authorised inspection station.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...