Jump to content
SAU Community

Recommended Posts

well one of my points is that you dont need forged pistons or different rods to make 700 hp from an rb 26 that is a proven fact you need turbo / 's to suit and a fuel system

cams you can reprogram the r32 gtr ecu or you can fit a plug in power fc or what ever ecu you like.

take for example an rb 26 for sale fully rebuilt stock pistons 272 cams balance, ecu etc 7500 turbo /'s to suit 3-4k injectors 1 k cooler 1500 ,fuel pumps 600 add 2k for things forgotten am I close?

hey squizz,

i didn't imply that the RB20 box will be good for 10's, i was mearly saying that it will be a simple bolt-up operation if he goes the RB30 conversion which will be nice for the street.

do u think a 3 spd auto with a 4000rpm converter, factory 4.11s in the ass is streetable?

meggala,

you're right, although $7.5k would only be for the engine w/out ECU/loom/injectors, etc, twin bb turbo's would cost more on the $4-5k, full fuel system would be about $1k, ECU (Power-FC) ~$1.5k or Autronic/Motec ~$3k, injectors - ~$1k and you've forgotten manifolds and external wastegates (needed for this kind of power) which would be more in the field of $3-4k.

So, you're looking at about $17-18k+ for a standard (reco'd) RB26DETT engine where for less than that, you'll have a fully rebuilt and forged RB30 bottom end along with the RB25DET which is very capable of producing the stated ~700hp reliably.

Also, given that it is a larger capacity engine (3000cc vs 2600cc) there will be more torque and it will produce the power easier, with less boost and rpms.

Speak to Mattlowth, he'll tell u what it costs and the capabilities of the engine. his is making 320rwkw (430rwhp) on only 16psi.

I'm sure if it's pushed a bit more, it will comfortably and reliably make over 500rwhp.

Originally posted by InExtremis

Hey riggaP, How is power/fuel consuption related to physics???

Fuel stores the potential energy that gets combusted and eventully makes the car move. To move the car faster you need to convert more chemical potential energy into mechanical kinetic energy (ie make it more efficient with the same amount of fuel) or alternatively let more fuel and air into the engine to combust (which is gonna be inevitable if were talking a 10 sec car).

Getting a car that runs 14s into the 13s could be done by making the engine more efficient (ie aftermarket ECU) without a significant increase in fuel consumption, but to get from 14s to 10s is gonna require a shit load of fuel to produce the power required hence making it a crap daily driver (just one of the reasons anyway).

I hope that makes sense...

riggaP,

Yes I understand the fact that potential energy leads to kinetic energy, this is the same for everything that moves, but increasing fuel and oxygen to create additional power doesnt just relate to physics. Remeber we are only talking about the power/fuel ratio.

Of course a moving car is related to physics, but when talking about the AMOUNT of fuel that is required to put out an AMOUNT of power, it is not just physics but also involves mathematics and chemistry.

The additional oxygen and fuel is used to create a greater CHEMICAL reaction, thus this reaction uses more fuel and creates more power. The fact that this reaction creates kinetic energy is irrelevent, because the consumption of fuel has already been determined from the chemical reaction.

Thus an increase in power is a result of a greater chemical reaction, where a greater volume of chemical components are required.

I agree that physics are involved, since the final output is power and cars move! but the ratio itself relies on a chemical concept, the physical concept is simply the result. I think what you meant was that it is simple science.

I don't mean any harm or flaming, all in good fun. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...