Jump to content
SAU Community

Recommended Posts

post-3573-1156838225.jpgpost-3573-1156838235.jpg

post-3573-1158208103.jpg

I've flipped the outline image to match it with the dash pic.

Seems the Airbag light is LED, and the others are a combination of high and low wattage bulbs. I'm not sure how some of the incandescent globes change to red, but the "A" globes have the blue silicon caps on them.

A - High wattage incandescent globe with silicone cap.

B - High wattage incandescent globe. "WL" could be LED also?

C - Low wattage incandescent globe.

D - LED. Seems to be only for the airbag light? I guess you never want that one to fail?

E - Same as C?

R33 GTST

Left:

1 - Door Open | 2 - Air Bag

1 - blank | 2 - Fuel low | 3 - ABS | 4 - Hand Brake

Top Center:

1 - Left Blinker | 2 - High Beams | 3 - Right Blinker

Bottom Center:

1 - Blanked | 2 - HICAS

Right:

1 - Seat Belt | 2 - Check Engine

1 - Oil Low | 2 - Cat Temp High | 3 - Battery Low

=================================

R33GTST w/Active Limited Slip Differential

Left:

1 - Door Open | 2 - Air Bag

1 - blank | 2 - Fuel low | 3 - ABS | 4 - Hand Brake

Top Center:

1 - Left Blinker | 2 - High Beams | 3 - Right Blinker

Bottom Center:

1 - SLIP | 2 - ALSD

Right:

1 - Seat Belt | 2 - Check Engine

1 - Oil Low | 2 - Cat Temp High | 3 - Battery Low

=================================

R33GTS4

Left:

1 - Door Open | 2 - Air Bag

1 - blank | 2 - Fuel low | 3 - ABS | 4 - Hand Brake

Top Center:

1 - Left Blinker | 2 - High Beams | 3 - Right Blinker

Bottom Center:

1 - 4WD | 2 - SLIP (need to confirm 1/2)

Right:

1 - Seat Belt | 2 - Check Engine

1 - Oil Low | 2 - Cat Temp High | 3 - Battery Low

=================================

R33 GTR

Left:

1 - Door Open | 2 - Air Bag

1 - blank | 2 - Fuel low | 3 - ABS | 4 - Hand Brake

Top Center:

1 - Left Blinker | 2 - High Beams | 3 - Right Blinker

Bottom Center:

1 - 4WD

Right:

1 - Seat Belt | 2 - Check Engine

1 - Oil Low | 2 - Cat Temp High | 3 - Battery Low

=================================

R33 GTR V-Spec

Left:

1 - Door Open | 2 - Air Bag

1 - blank | 2 - Fuel low | 3 - ABS | 4 - Hand Brake

Top Center:

1 - Left Blinker | 2 - High Beams | 3 - Right Blinker

Bottom Center:

1 - 4WD | 2 - SLIP (need to confirm 1/2)

Right:

1 - Seat Belt | 2 - Check Engine

1 - Oil Low | 2 - Cat Temp High | 3 - Battery Low

=================================

Glossary:

Door Open

Air Bag - Failure or testing.

Fuel Low - Sender reports low fuel level.

ABS - Anti-skid Braking System failure or testing.

Hand Brake - (on R32 models, this can also mean that your brake fluid reservoir is low)

Left Blinker

High Beams - Not related to fog/spotlights.

Right Blinker

4WD - GTR/GTS4 4WD Attessa system failure or testing.

HICAS - Four wheel steering failure or testing

SLIP - Active LSD Traction Control on at testing and on when traction loss

ALSD - Active Limited Slip Differential failure or testing

Seat Belt - Drivers seatbelt only

Check Engine - Usually means an engine sensor is faulty.

Oil Low - Oil level low. Oil pressure is read from the oil pressure guage

Cat Temp High - Catalytic converter probe reading above normal temperatures.

Battery Low - Output voltage from alternator is lower than normal

I will update the others as I find out. If you know the missing ones, please advise!

Edited by RANDY

There is no "traction" light on the R33 gtst.

Also the GTSTML spec has SLIP and ALSD in the centre of the tacho

See here http://members.dodo.com.au/paul/pics/mycar...SCF0009_JPG.jpg

Ah yeah... That might be for another model.

I saw the SLIP (traction) on my mates R33 GTS4... which is not a GTST, as you pointed out.

Where in the centre for the "L" version? Instead of HICAS and whatever my other blanked one is?

in between fuel low and handbrake is the ABS light.

the 1 to the left of the fuel low light is blank

so its actually

1 - blank | 2 - Fuel low | 3 - ABS | 4 - Hand Brake

and the blanked off 1 next to the HICAS light is the 4WD light in the GTR

  • 2 months later...

4WD - GTR/GTS4 4WD Attessa system failure or testing.

HICAS - Rear wheel steering failure or testing

SLIP - Active LSD Traction Control on at testing and on when traction loss

ALSD - Active Limited Slip Differential failure or testing

GTST Active LSD model has SLIP and A-LSD lights in the centre

GTS4 version has SLIP and 4WD lights

GTR only has 4WD light

GTR Vspec has SLIP and 4WD lights

the normal r33 has viscous LSD

there was a limited build of the Active LSD model

which has the lights on the dash and the gtr differential

its the same as the vspec system

I can grab the same kind of image from FAST. It's just a matter of finding out the wattages and locations of all the bulbs and LED's. I'm sure the '32 owners would find it useful!

The number of threads i've seen where people ask "what does this light mean", "what would light up in this location", or "what kind of bulb goes here"... ;o)

Edited by RANDY

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even with no BOV you will have issues unless the MAF is a hot film type like the R35 which has some design features to deal with reversion. Hot wire MAFs are very sensitive.
    • So i just change the (whatever is inside ma original MAF and slide the R34 MAF (it is gonna fit right in? ) and somewhere on the hot side a BoV...i presume that would be vented to the atmo? I just "trying" to understand...maybe my mechanic would know this   I would not mind(even prefer) to run stock BoV cuz it is way more than fine but i do not have that and only pipeing what is left is oem J pipe ... I will be running Blitz fmic(to fit oem one side style) and i gonna need custom pipes cuz i do not have rest of those pipes and hoses... But i am want standalone ECU. Only choice i have atm is Nistune...but that is not gonna cut it right?I dont know what Nistune can and cant do... I know you guys know Link and Haltech...but whatabout ECUmaster? I know guys in here run those but i literally do not know about that and do not know differences... Just know to take whatever "my" tuner can work on.  
    • Is that the blue one rpm?  
    • Update 2: Today I'm f**king pissed. Some of you probably saw my thread that I opened shortly after joining this forum, "urgently need expert/experienced opinion", in which I discussed the possibility of a porous RB26 engine block which I also found hard to believe. Currently both turbos are out since the shitty braided line that was installed by whoever fitted the GT28 turbos leaked oil onto the exhaust. Today while working on the cam covers to put new gaskets and half moons in, I cleaned the side of the engine block with brake cleaner. Some time later I saw that it was still glistening with oil or coolant so I dried that off. But it was wet again shortly after. Verdict: I'm royally screwed. What you can see here (hopefully, despite shit resolution), circled in red, is a crack above the turbo oil feed. Extent is a few cm long and basically goes from #3 cylinder wall to #4 cylinder wall. It slowly lets coolant through, even without any pressure behind it. I am absolutely dumbfounded as to how this crack even formed, especially since it isn't along the cylinder as it usually is but rather a horizontal crack. Probably a few cm in length. Not sure on how to deal with this issue right now. Most likely, the only true fix is a new engine block, and even a relatively well done temporary fix requires at least a full engine teardown. Neither of those really fit my timetable right now, the car has been in my buddy's garage long enough as it is. I'm open to suggestions, but I'll be looking into ordering a new 05U block soon so I have one ready for the coming year, or whenever the current block inevitably fails fully. (Most likely once the crack reaches one of the frost plugs) I think it'd be a waste of money and time to rebuild the engine with this block. Oh and I found a rust hole on the side pocket of the trunk, which someone covered up with sealant goop, a piece of number plate and bodywork filler. Fun times. So far for every issue we fix we just find a new one that is arguably worse.
    • I have not found this no. I put one back on a couple days ago with no drama. I agree they are tight, but no need to remove anything. 
×
×
  • Create New...