Jump to content
SAU Community

Recommended Posts

post-3573-1156838225.jpgpost-3573-1156838235.jpg

post-3573-1158208103.jpg

I've flipped the outline image to match it with the dash pic.

Seems the Airbag light is LED, and the others are a combination of high and low wattage bulbs. I'm not sure how some of the incandescent globes change to red, but the "A" globes have the blue silicon caps on them.

A - High wattage incandescent globe with silicone cap.

B - High wattage incandescent globe. "WL" could be LED also?

C - Low wattage incandescent globe.

D - LED. Seems to be only for the airbag light? I guess you never want that one to fail?

E - Same as C?

R33 GTST

Left:

1 - Door Open | 2 - Air Bag

1 - blank | 2 - Fuel low | 3 - ABS | 4 - Hand Brake

Top Center:

1 - Left Blinker | 2 - High Beams | 3 - Right Blinker

Bottom Center:

1 - Blanked | 2 - HICAS

Right:

1 - Seat Belt | 2 - Check Engine

1 - Oil Low | 2 - Cat Temp High | 3 - Battery Low

=================================

R33GTST w/Active Limited Slip Differential

Left:

1 - Door Open | 2 - Air Bag

1 - blank | 2 - Fuel low | 3 - ABS | 4 - Hand Brake

Top Center:

1 - Left Blinker | 2 - High Beams | 3 - Right Blinker

Bottom Center:

1 - SLIP | 2 - ALSD

Right:

1 - Seat Belt | 2 - Check Engine

1 - Oil Low | 2 - Cat Temp High | 3 - Battery Low

=================================

R33GTS4

Left:

1 - Door Open | 2 - Air Bag

1 - blank | 2 - Fuel low | 3 - ABS | 4 - Hand Brake

Top Center:

1 - Left Blinker | 2 - High Beams | 3 - Right Blinker

Bottom Center:

1 - 4WD | 2 - SLIP (need to confirm 1/2)

Right:

1 - Seat Belt | 2 - Check Engine

1 - Oil Low | 2 - Cat Temp High | 3 - Battery Low

=================================

R33 GTR

Left:

1 - Door Open | 2 - Air Bag

1 - blank | 2 - Fuel low | 3 - ABS | 4 - Hand Brake

Top Center:

1 - Left Blinker | 2 - High Beams | 3 - Right Blinker

Bottom Center:

1 - 4WD

Right:

1 - Seat Belt | 2 - Check Engine

1 - Oil Low | 2 - Cat Temp High | 3 - Battery Low

=================================

R33 GTR V-Spec

Left:

1 - Door Open | 2 - Air Bag

1 - blank | 2 - Fuel low | 3 - ABS | 4 - Hand Brake

Top Center:

1 - Left Blinker | 2 - High Beams | 3 - Right Blinker

Bottom Center:

1 - 4WD | 2 - SLIP (need to confirm 1/2)

Right:

1 - Seat Belt | 2 - Check Engine

1 - Oil Low | 2 - Cat Temp High | 3 - Battery Low

=================================

Glossary:

Door Open

Air Bag - Failure or testing.

Fuel Low - Sender reports low fuel level.

ABS - Anti-skid Braking System failure or testing.

Hand Brake - (on R32 models, this can also mean that your brake fluid reservoir is low)

Left Blinker

High Beams - Not related to fog/spotlights.

Right Blinker

4WD - GTR/GTS4 4WD Attessa system failure or testing.

HICAS - Four wheel steering failure or testing

SLIP - Active LSD Traction Control on at testing and on when traction loss

ALSD - Active Limited Slip Differential failure or testing

Seat Belt - Drivers seatbelt only

Check Engine - Usually means an engine sensor is faulty.

Oil Low - Oil level low. Oil pressure is read from the oil pressure guage

Cat Temp High - Catalytic converter probe reading above normal temperatures.

Battery Low - Output voltage from alternator is lower than normal

I will update the others as I find out. If you know the missing ones, please advise!

Edited by RANDY

There is no "traction" light on the R33 gtst.

Also the GTSTML spec has SLIP and ALSD in the centre of the tacho

See here http://members.dodo.com.au/paul/pics/mycar...SCF0009_JPG.jpg

Ah yeah... That might be for another model.

I saw the SLIP (traction) on my mates R33 GTS4... which is not a GTST, as you pointed out.

Where in the centre for the "L" version? Instead of HICAS and whatever my other blanked one is?

in between fuel low and handbrake is the ABS light.

the 1 to the left of the fuel low light is blank

so its actually

1 - blank | 2 - Fuel low | 3 - ABS | 4 - Hand Brake

and the blanked off 1 next to the HICAS light is the 4WD light in the GTR

  • 2 months later...

4WD - GTR/GTS4 4WD Attessa system failure or testing.

HICAS - Rear wheel steering failure or testing

SLIP - Active LSD Traction Control on at testing and on when traction loss

ALSD - Active Limited Slip Differential failure or testing

GTST Active LSD model has SLIP and A-LSD lights in the centre

GTS4 version has SLIP and 4WD lights

GTR only has 4WD light

GTR Vspec has SLIP and 4WD lights

the normal r33 has viscous LSD

there was a limited build of the Active LSD model

which has the lights on the dash and the gtr differential

its the same as the vspec system

I can grab the same kind of image from FAST. It's just a matter of finding out the wattages and locations of all the bulbs and LED's. I'm sure the '32 owners would find it useful!

The number of threads i've seen where people ask "what does this light mean", "what would light up in this location", or "what kind of bulb goes here"... ;o)

Edited by RANDY

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...