Jump to content
SAU Community

Recommended Posts

Okay, now I know we don't have a functioning drag strip in Adelaide at the moment, but if anyone is keen to get a good deal on a set of MT ET Street Radials, I have just ordered a set of 275/40/17's from A1Performance in WA for a grand total of $265ea (+$30 freight) delivered direct from the warehouse - located on the East Coast.

Example of 275/40/17:

604628_84_full.jpg )

The local prices are mid $300's (for the places I contacted) and Rocket Industries and VPW are quoting $350+.

Mickey Thompson's legendary race tire technology comes to the street with the all-new ET Street Radial. Built using the latest in high tech radial construction techniques and years of drag racing experience in compound development, this DOT approved street legal drag radial will get your car down the track in record time and drive you home with sure handling and an excellent ride! The ET Street Radials feature a soft drag tire compound for superior traction on the drag strip and a special sidewall construction for quick launches. Radial body plys for excellent ride control on the street and a low void, directional tread pattern for maximum dry traction. The polyester ply, steel belted gives added strength and durability.

Now I just need my car finished and AIR open for drag racing again :laugh: But in the mean time I'll be using them on the road anyway - at those prices why not!?

Edited by whatsisname
Link to comment
https://www.sau.com.au/forums/topic/132336-2754017-mt-et-street-radials/
Share on other sites

That is a great price indeed.

Matt, are you aware these tyres are NOT street legal in Australia?

I know guys who drive to and from the track on them, even ones that have been pulled up at brethos and not busted, but it's the whole "no insurance" if you crash thing that worries me most.

They do not have load ratings marked on them.

Also, I've been advised that they are very much a straight line tyre - twisties will be right off the list if you do decide to run them. Also shocking in the wet - even damp roads are like ice.

Hope this doesn't rain on your parade too much, but I'd hate for you to find out anything like this the hard way mate.

G'day Will,

Yep was aware of that one mate - I have a 'back-up plan'. But I understand your line of thinking.

I've actually had a number of first hand reports that have stated they are reasonably capable of coping with semi-spirited cornering - that was the first question I put to the guys using them on the road. As for wet weather use... ~300rwkw, a wet road and RWD don't mix at the best of times. On the RE540s it was easy does it in the wet, on the Nittos it was easy does it in the wet... and the ETs will be no different. I don't like driving the 33 in the wet anyway. It might get dirty! :/

Yeah I was very happy with the price, Adrian.

Sorry Sean :( Conrgat's on the new PB... and your fame in the latest Zoom :P

Will, sorry if my reply above sounded a bit 'smart', upon re-reading it it kinda' sounded like I was being a bit of a smart-arse... I wasn't trying to be mate :P

I 100% appreciate your info', as it prompted me to do even more research. I'm currently waiting on more feedback as to both the legalities and cornering capabilties (of 275/40/17s in particular) from a couple of 'in the know' sources. Will hopefully have a reply COB Monday. Ultimately I will still be using them as my 'everyday' rear tyres - everyday for the Skyline means once a month :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...