Jump to content
SAU Community

Help Wildcat Out

Wildcat

By Wildcat,
in Four Door Family & Wagoneers

 Share

Recommended Posts

Wildcat Grand Master

Wildcat

Posted
Posted

hi all

Its a lovely day here in Perth (not,,,bloody horrible actually :wub:)...I went to turn my back window wiper on only to find that it did nothing :( I turned it onto the On position and all i could see was the top bit moving and the wiper and holder move downwards and thats where it stayed :D

Is this a sign that it has died :bunny: or that i have a wire lose or does something need tightening :D my first impressions where that if i could see it move that it was probably not dead...but with weather like this it is almost impossible to see anything out of my back window..and ideas would be greatly appreciated :bunny:

Thanks champs

Wildcat :D

Link to comment
https://www.sau.com.au/forums/topic/132377-help-wildcat-out/
Share on other sites
Ska Grand Master

Ska

Posted
Posted

First thing would be check fuses

Other then that you'll have to do what i had to do for a full diagnostic, meaning take the cowling off the top and bottom of the steering column, there are 9 screws underneath, and check the 4 wire plug on the left of the steering column.

Then get an electrical type person to "close the circuts" and "check for eath" and "check for positive" with and without the switch being on.

then check the wiring running from the steering column, under the dash, under the drivers side foot/kick panel, under the drivers seat, under the drivers side passenger seat, behind the plastic under the back drivers side glass and then through to the back door.

then manually close the circut on the wiper motor to see if it works independantly from the switched wiring, get positive from somewhere else.

from that I determined that the wiring going to the switch from the old ecu was somehow lost in the spaghetti going into the power-fc, which is somehwere in the dash.

So I'm just going to manually rewire the switch, easiest solution for me :(

Wildcat Grand Master

Wildcat

Posted
  • Author
Posted
First thing would be check fuses

Other then that you'll have to do what i had to do for a full diagnostic, meaning take the cowling off the top and bottom of the steering column, there are 9 screws underneath, and check the 4 wire plug on the left of the steering column.

Then get an electrical type person to "close the circuts" and "check for eath" and "check for positive" with and without the switch being on.

then check the wiring running from the steering column, under the dash, under the drivers side foot/kick panel, under the drivers seat, under the drivers side passenger seat, behind the plastic under the back drivers side glass and then through to the back door.

then manually close the circut on the wiper motor to see if it works independantly from the switched wiring, get positive from somewhere else.

from that I determined that the wiring going to the switch from the old ecu was somehow lost in the spaghetti going into the power-fc, which is somehwere in the dash.

So I'm just going to manually rewire the switch, easiest solution for me :no:

:) oh my :rofl: that sounds like a long job...might check if its a fuse if not i will learn to have something broken :huh: thanks for your help champ

Revhead Grand Master

Revhead

Posted
Posted

From your description it sounds like somehow the wiper arm has detached itself from the motor. I don't remember how Stag tailgates are put together but if you can get at it, check to see if a clip hasn't just fallen off or something. If you're not mechanically minded it might be worth taking it to a workshop and mention that you think this might be the case and ask them to look at it. Get someone to recommend a shop that won't take you for a ride (SAUWA club sponsors would be a good place to start) and possibly take a guy with you, from your sig I'm guessing you're female. Yes it's sexist, but some shops do still overcharge or outright lie to women if they think they can get away with it.

If you want to check it, turn the rear wiper on, then go to the back of the car. If you can hear the wiper motor going, it's not wiring, fuses or a relay so you can avoid the nasty job of getting into the dash and steering column :rofl:

ish Proficient

ish

Posted
Posted

I agree with Revhead.

It happened to me while I was borrowing my mum's r31 so i had to fix it for her.

Its is a bit tricky to get at and you have to concertrate on the links being the right way round or the wipers will try to stop up the top in stead of tucked away. :rofl:

Wildcat Grand Master

Wildcat

Posted
  • Author
Posted (edited)
If you want to check it, turn the rear wiper on, then go to the back of the car. If you can hear the wiper motor going, it's not wiring, fuses or a relay so you can avoid the nasty job of getting into the dash and steering column :)

ok i went to the back of the car if i lift the wiper up it is really loose and moves around if i let go of it, it falls to the ground. Then i put it back on the down on the window turned it on and you can see the round bit just before the wiper blade/holder itself trying to lift it up but nothing happens... :rofl:

Edit* forgot to mention that i can see the round bit actually rotating around and hear the motor going but the blade just wont move...driving me nuts jks

Edited by Wildcat
Wildcat Grand Master

Wildcat

Posted
  • Author
Posted
Sounds like it should be a relatively easy fix then :no:

Like a steering wheel down the pants?

:rofl: bit uncomfortable me thinks but i could probably handle that :huh: as long as it wasnt my steering wheel :) just jokes

back on topic im hoping that it will be easy enough to fix :O

Wildcat Grand Master

Wildcat

Posted
  • Author
Posted
Obviously not !! :O

:P should be an easy fix then........... for hubby (with supervision by the sounds of it)!

oh mister tangles :) i have faith..i just like to be independent and being a girl and all i would like to be able to do things that men think only they can do :P but of course hubby can look at it and fix it and i can watch :laugh::laugh:

MrGTST Grand Master

MrGTST

Posted
Posted
oh mister tangles :blink: i have faith..i just like to be independent and being a girl and all i would like to be able to do things that men think only they can do :P but of course hubby can look at it and fix it and i can watch :P:)

You just make sure my dinner is ready for when I get home ... thats a good girl :wave:

Could you also please make sure the spare bed is made so I have somewhere to sleep tonight :P:laugh::laugh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...