Jump to content
SAU Community

Recommended Posts

Hi guys,

just wondering anybody tried the boost p8 by United before. United its owned by Mobil now. This was breifly mentioned in the force induction section.

It got me thinking. If people is talking about converting to Lpg because of the fuel cost, why not use the United Boost 98? I called the box Hill Branch in Victoria and they wer selling it for $1.39/lts of the boost 98. Boost 98 got 10% ethanol in it.

I have asked this question on the on ther thread. Has anybody tried it long term? My bro said that Nissan engine are not compitable with ethanols. And theres no listing for Nissan as well in the United website. Hondas are not included as well.

FOe $1.359 its preety cheap compared to other 98 Ron fuels by about 8-10 cents i believe. Also since Ethanol is corrosive wouldnt be good to keep the engine clean as well? Like the Biodiesel as well it will keep the engine clean. Optimax Extreme got 5% Ethanol in it but its damn dear i think when i tried it a few weeks ago it was $1.50/ltr. But thats 100 Ron though. But is it worth it compared to the Unite Boost 98 and the Optimax Extreme and the Normal 98Ron and the Lpgs.

ANother thing is on the other thread they wer saying the engine has to be tuned to suit the fuel in ths case the ethanol. Couldnt we program 2 maps into the Power FC so when you use the boost 98 you switch to a specific map and switch again when you are using normal 98 Ron?

Heres the lin to Unite , it will show you where Boost 98 is available australia wide

http://www.unitedpetroleum.com.au/distribu...8-locations.asp

All this just tyring to reduce our fuel costs. See what you guys think.

Edited by stasis
Link to comment
https://www.sau.com.au/forums/topic/132781-boost-98/
Share on other sites

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

I still think the issue with ethonol is the effects on the fuel system, pumps, injectors, seals, etc. I reckon a pfc tuned to use this fuel would be fine, but would everything else cope with constant use?

that we dont know. I think the government is dong trials in different states to study the long term effects on the cars at the moment. So... Im thinking of trying it on my next tank of fuel

Link to comment
https://www.sau.com.au/forums/topic/132781-boost-98/#findComment-2460596
Share on other sites

Ive tried a few tanks of it, generally filled up when still had a qtr of normal BP/Mobil 98 fuel in the tank. It feels nice to drive, is responsive, etc....... once I put in half a tank with no other mix of fuel, and it seemed ok - but I decided at the time that I wouldnt do that again, as Id rather do a 50:50 mix to be "safe"r.

edit: shell 100 ron looks to be coming to SA soon - so I wouldnt mind trying a 50/50 of Boost98 from Liberty and Shell 100 ron fuel

Brendan

Edited by Tangles
Link to comment
https://www.sau.com.au/forums/topic/132781-boost-98/#findComment-2460605
Share on other sites

Ive tried a few tanks of it, generally filled up when still had a qtr of normal BP/Mobil 98 fuel in the tank. It feels nice to drive, is responsive, etc....... once I put in half a tank with no other mix of fuel, and it seemed ok - but I decided at the time that I wouldnt do that again, as Id rather do a 50:50 mix to be "safe"r.

edit: shell 100 ron looks to be coming to SA soon - so I wouldnt mind trying a 50/50 of Boost98 from Liberty and Shell 100 ron fuel

Brendan

It could be the go. 50:50 Liberty/Shell. I've been using Liberty for a while and find it does drive smoothly,but if its better than Shell98 which is available on Mt Tamborine, I couldn't say.

As I've said before the Stagea is VERY smooth and responsive.

Time will tell :):)

Edited by 66yostagea
Link to comment
https://www.sau.com.au/forums/topic/132781-boost-98/#findComment-2460777
Share on other sites

I assume everybody has read my posts on using Optimax Extreme 100 ron in the R33GTST for the last 8 months (35 tank fills) or so. It is 5% ethanol and I have seen ZERO effect on any of the components, that’s injectors, hoses, fuel pumps, fuel filters etc are all perfect. All I see is more power and less knock.

I seriously doubt that 10% ethanol would have any effect on the components either. But it is easy to check for, stick a new fuel filter on and use the 10% ethanol continuously for a while, say a month, 5 or 6 tank fulls. Then remove the fuel filter, cut it open and check for foreign matter. If there isn’t any, then I’d say you have no problems.

:) cheers :)

Link to comment
https://www.sau.com.au/forums/topic/132781-boost-98/#findComment-2460871
Share on other sites

Then remove the fuel filter, cut it open and check for foreign matter. If there isn’t any, then I’d say you have no problems.

Wouldn't the concern be the effect of corrosion on fuel lines etc, rather than particles? Or are you saying the particles would be stopped by the filter?

Because my question would be how ethanol corrosion on rubber works anyway, because if it just liquifies it then you're not going to get any in the filter unless you've used it for a very very long time and caught sludge.

Link to comment
https://www.sau.com.au/forums/topic/132781-boost-98/#findComment-2460902
Share on other sites

Hey SK, got a link to your thread? I wouldnt mind reading it.

They used to have 100RON BP Extreme here in rocky, now they dont, replaced with 95ron 5% ethonol blend :wub:

Time to learn how to use the search feature, try;

"Sydneykid"

"Extreme"

"Any date"

:ninja: cheers :dry:

Link to comment
https://www.sau.com.au/forums/topic/132781-boost-98/#findComment-2461836
Share on other sites

Wouldn't the concern be the effect of corrosion on fuel lines etc, rather than particles? Or are you saying the particles would be stopped by the filter?

Because my question would be how ethanol corrosion on rubber works anyway, because if it just liquifies it then you're not going to get any in the filter unless you've used it for a very very long time and caught sludge.

What fuel lines are we talking about?

The steel ones? I don't believe ethanol has any affect whatsoever on steel.

The synthetic rubber ones? On the R33GTST that’s 5 really short pieces that are easily accessible;

Tanks/pump outlet to steel line

Steel line to fuel filter

Fuel filter to fuel rail

Fuel pressure regulator to steel line

Steel line to tank return

When I checked the fuel filter I removed #2 and #3. Any corrosion would show up as softness, loss of rigidity and thinner wall thickness. That’s a no to all three. Any flaking would show up as pieces trapped in the fuel filter. That’s a no to that one as well.

I have also removed, flushed and cleaned the injectors, plus I checked their flow and compared it to before we started using Optimax Extreme. Just in case something snuck past the fuel filters. Or the injectors themselves were somehow corroded or damaged by the ethanol. As you might have guessed, that’s a no to that one as well.

I haven’t measured the flow of the standard R33GTST fuel pump, but it still produces the same pressure (on the GReddy fuel pressure gauge) as it did before we started using Optimax Extreme. So that would indicate to me that some 2,000 litres of Optimax Extreme has had zero effect on the fuel pump

If I have forgotten anything that I should check, please let me know and I will gladly check it. I have asked Nissan why they won’t recommend ethanol, and the above were all the possible reasons they could give me.

:D cheers :D

Link to comment
https://www.sau.com.au/forums/topic/132781-boost-98/#findComment-2463917
Share on other sites

Hi all my hubby started this topic in the forced induction section.

And as he stated we have both noticed the considerable difference with both our cars.

Not just the fuel consumption side but also performance wise.

I was using shell fuel then swapped to bp and I was only getting maybe 200k to a full tank I now get 350-400k a tank. And I do not drive any differently. I have used boost98 for nearly 6 mths and will continue to do so. Also my fuel filter was changed before swapping to boost98 and it was full of crap and that was from using shell and bp fuel, don't know what kind of condition the new one is in but when this one is replaced I will let you know if I have any sludge inside..

Anyway that is my 2 cents worth, I spose it comes down to the fact each to their own if you find something that works for your car then stick with it.

Link to comment
https://www.sau.com.au/forums/topic/132781-boost-98/#findComment-2468123
Share on other sites

im trying the boost 98 on my next tank. One thing. My bor filled up my dad's HSV with the 95 United and i asked him any difference? He said its smotther ride. So just to let you guys know.

My theory is if this boost 98 is a pretty good fuel copared to the other 98 ron sucha as shell, Bos and Mobil. Why not use it.

@ advantages, less impact on the environment and you can hammer more cos you know your fuel is cheap. HAHAH!!. But thats me in the stage of denial soz guys i have to carcj this one cant help my self

Link to comment
https://www.sau.com.au/forums/topic/132781-boost-98/#findComment-2468505
Share on other sites

Nissan continues to place a very high priority on effective environmental management and has taken a comprehensive approach to reducing CO2 emissions, developing fuel-efficient engines, highly efficient transmission systems, lightweight, high strength vehicle bodies as well as more aerodynamic vehicles with low air resistance. Examples of advancement by Nissan with this type of technology are evident in some recent new releases such as 350Z, Maxima and Murano.

Can my vehicle run on fuel containing ethanol?

Nissan vehicles manufactured from 1 January 2004 onwards are capable of operation on ethanol blends up to E10 (10% ethanol), providing the following conditions are met:

The fuel used (including ethanol-blend) meets the requirements of the Australian Fuel Quality Standards,

A credible history of servicing as per Nissan's recommended service schedule can be shown, and

Blending of the ethanol component to the petroleum component of the fuel has been properly made for example at a fuel refinery (ie there is no "splash"-blending of the fuel).

For Nissan vehicles manufactured prior to 1 January 2004, although capable of operation on ethanol-blended ULP, Nissan does NOT recommend the use of ethanol-blended fuel in these vehicles.

i hope it helps

Link to comment
https://www.sau.com.au/forums/topic/132781-boost-98/#findComment-2469529
Share on other sites

Nissan continues to place a very high priority on effective environmental management and has taken a comprehensive approach to reducing CO2 emissions, developing fuel-efficient engines, highly efficient transmission systems, lightweight, high strength vehicle bodies as well as more aerodynamic vehicles with low air resistance. Examples of advancement by Nissan with this type of technology are evident in some recent new releases such as 350Z, Maxima and Murano.

Can my vehicle run on fuel containing ethanol?

Nissan vehicles manufactured from 1 January 2004 onwards are capable of operation on ethanol blends up to E10 (10% ethanol), providing the following conditions are met:

The fuel used (including ethanol-blend) meets the requirements of the Australian Fuel Quality Standards,

A credible history of servicing as per Nissan's recommended service schedule can be shown, and

Blending of the ethanol component to the petroleum component of the fuel has been properly made for example at a fuel refinery (ie there is no "splash"-blending of the fuel).

For Nissan vehicles manufactured prior to 1 January 2004, although capable of operation on ethanol-blended ULP, Nissan does NOT recommend the use of ethanol-blended fuel in these vehicles.

i hope it helps

So what? we can use it? Not recommended ia a very general temr isnt it? Well can we acutally use it or not?! Comeon guys!! Just want to set the record straight.

Link to comment
https://www.sau.com.au/forums/topic/132781-boost-98/#findComment-2469847
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...