Jump to content
SAU Community

Recommended Posts

hi people,

i recently boosted my car to 12 psi and i have 2 probs 1 of these is i've boosted it to 12 psi but on my stock boost gauge its hitting +7 hmg which is equivelant to 14.6 psi and 2nd prob is everytime i hit max boost im getting backpressure anyideas why this maybe happening? thanks for takin time to read and help much appreciated.

Link to comment
https://www.sau.com.au/forums/topic/132823-backpressure/
Share on other sites

what do you mean by back pressure? do you mean that the car is cutting out? if it is then you are hitting rich and retard. the only real way around it is a new ecu.

as for the stock gauge, it may be inaccurate.

mmm not cutting out, as in its giving off tiny backfires like when i hit full boost i hear lil popping sounds. :(

Link to comment
https://www.sau.com.au/forums/topic/132823-backpressure/#findComment-2460144
Share on other sites

oh, so its missfiring.

in that case, what sort of plugs do you have, and what gap?

to be honest brother i have no idea i recently bought it and as far as i know its 100% stock so u think it might be the plugs?

Link to comment
https://www.sau.com.au/forums/topic/132823-backpressure/#findComment-2460167
Share on other sites

more than likely it is the plugs. get some ngk BCPR6ES. they are about $3 each. they should be gapped to 0.8mm. stick them in and see what happens. if that doesn't fix it , it may be that the coilpacks need to be taped up.

thanks alot brother i'll give her a try as soon as i get home

Link to comment
https://www.sau.com.au/forums/topic/132823-backpressure/#findComment-2460200
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...