Jump to content
SAU Community

Recommended Posts

P4004 rockford fosgate amp for sale

with birth sheet

now $440 + P&H (or pickup)

Also got

P450.4 - 4ch amp this is the NEW 06 model

$550 ONO

BRAND NEW IN BOX

One of these is going in my car, the other is for sale (depending on which one sells first)

Reason : No use for 2 x 4ch amps

WILL CONSIDER TRADE WITH ANY OF THE FOLLOWING (incl. cash adjustment as appropriate)

-Silicon hoses 4mm & 6mm

-Tomei Oil filler cap

-Greddy Oil Catch Can

-Silicon 60mm joiners

-Tomei cams (for series II R33)

Link to comment
https://www.sau.com.au/forums/topic/132913-p4004-rockford-amp/
Share on other sites

  • 4 weeks later...
P4004 rockford fosgate amp for sale

with birth sheet

Brand new in box, opened to have a peek

Pick up in Sydney

$480 ONO

PRICE REDUCED TO SELL

$440 PICKUP or $440 + POSTAGE

  • 2 weeks later...
  • 3 weeks later...
Is the p4004 a mono Block or 4 cHannel or two? :)

P4004 is a 4 channel amp.

The amp is sold though sorry.

The way the rockford amps are rated is the first three numbers give the power

so a P4004 is 400 watts

and the last number is the number of channels so in this case 4.

a P6001 is 600W 1 channel

a P8002 is 800W 2 channel etc

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Shouldn't need a "base map" for anything other than guidance to ignition tuning. You just need the engine capacity right, the injector size right, and something, almost anything, for a VE map. On an NA engine, fuelling is almost completely a function of load signal & rpm. It should run and drive with a completely flat fuel map. It will be too lean under load, but that's easily fixed. We used to tune all ECUs without any base map. There were no such things (until someone had tuned a near stock engine on one, and then they had a "base map".
    • What did you actually buy/how much did it cost? When I got mine in like.. 2017...? 2019? the aim was to run Torque for gauges via ODB2 and things like Track Addict/Laptimers/Dashcam/Reversecam/Spotify etc. Mine never broke, but I wonder if you've got the same needs (it sounds like it). Cause I liked the idea of being able to do anything with it. That said, yours also cost 3x the cost of what I spent so... food for thought.  
    • For me there is a massive difference in manufacturer or big brand crippled android (Sony, Kenwood etc) vs the sort of thing I've installed here, which is basically just a tablet in DIN form factor with open Android, and the other model of course is mirroring - Android Auto/Carplay. I hate the locked down manufacturer and AA options where they decide what apps I'm allowed to install, including the Launcher but also importantly things like Ecutek (for this car) or Real Dash (Stagea) are not supported. Plus those crippled versions tend to be slower due to both overheads and lower spec hardware. On the other hand, when this breaks I'll likely be in trouble for support....but how is that different to owning an Infiniti anyway
    • Yeah, Duncan is helping sell me back to Android devices. I've hated the whole Android head units due to their speed issues. Even in my old Hyundai Kona (2022 model), it behind the scenes was Android, and slow and shitty to start up. Once running wasn't bad, but still a good 15 to 30 seconds.
    • My roof rails are off atm on the E39 until the rust is fixed. I did find another little bit of surface rust under the rails when I took them off. As @soviet_merlin said I'd just leave them alone unless you're planning on ensuring they're properly sealed. I was on the fence about leaving them off as the delete is still a thing in BMW E39's but I feel like the car is missing something (er, it is, der) with them off and I'm looking forward to putting them back on.
×
×
  • Create New...