Jump to content
SAU Community

Gb: R32, R33, R34 Skyline Carbon Fibre And Fibreglass Bits


Recommended Posts

  • Replies 272
  • Created
  • Last Reply

Top Posters In This Topic

Rflirty4 added to the list... just awaiting confirmation of stock first.

All the others in Order #2; your stuff is en-route now, sorry for the delay.

Well he said he's just waiting for a moment to get to the post office over there - it only takes a few days after that and I'll be sending everyone's stuff express once it's here!

OK I got an answer for the CF boot lid... you can get these in the following "colours":

Black CF (what we usually see in AUS)

Silver CF

Blue CF

Price I've been told is approximately $1k + freight... they are as per the photos posted on page 1. Obviously a few things will need to be transferred over (stop light, locks, latches etc)

Personally, I wouldn't bother unless you're made of gold.

OK I got an answer for the CF boot lid... you can get these in the following "colours":

Black CF (what we usually see in AUS)

Silver CF

Blue CF

Price I've been told is approximately $1k + freight... they are as per the photos posted on page 1. Obviously a few things will need to be transferred over (stop light, locks, latches etc)

Personally, I wouldn't bother unless you're made of gold.

any idea on freight cost?????? cause i really dont mind paying $1000 for the boot lid itself (as there is only one guy in australia that i have had an answer back on and said he can do it but he wants up front payment before making it and sound a bit dodgy eg. no pick up and bank deposit only even though he is in sydney and close to me!!!!)

maybe if more ppl want them we can split the freight costs?

and by the way im after black cf

thanks

Justin

Cost of freight will depend on the way we send it... obviously it will need to be packed very well; insured and tracked - these three items don't come cheap; add on more if you want it in a hurry too.

I will dummy up some numbers :P

Cost of freight will depend on the way we send it... obviously it will need to be packed very well; insured and tracked - these three items don't come cheap; add on more if you want it in a hurry too.

I will dummy up some numbers :P

thanks

i would appreciate that heaps, if other ppl are interested in these boot lids for r34 please voice your interests now and we maybe able to save on the shipping cost...

by the way im not in a huge rush so if i can save on the cost of freight by sending it economy, by boat i dont mind

I'd estimate that by sea; you'd be looking at an extra $100-$150 in freight... those in Sydney can then make the effort to come collect it from me as I really cannot be bothered to lug around a boot lid :) (I'm small, so lay off)

I'd estimate that by sea; you'd be looking at an extra $100-$150 in freight... those in Sydney can then make the effort to come collect it from me as I really cannot be bothered to lug around a boot lid :dry: (I'm small, so lay off)

mate that price of $1000+$100-$150 freight is fine. can you go ahead and order a black cf one for me please. just let me know when you need payment we can meet up and i can pay you in person. and pick up is not a problem.

also is there any chance of getting the boot lid made without the key barrell hole and the middle brake light hole? if so i would appreciate that but if not it doesnt really worry me.

thanks

Justin

0425291404

Justin; I'm not going to promise you anything yet - I will have to get in contact with this guy and ask for confirmation. I don't want to promise something I can't deliver that's all.

If he's all good with it then yeah, we'll go ahead with it ;)

Justin; I'm not going to promise you anything yet - I will have to get in contact with this guy and ask for confirmation. I don't want to promise something I can't deliver that's all.

If he's all good with it then yeah, we'll go ahead with it :laugh:

satanic

no problem mate just let me know when confirm. i appreciate your help.

thanks

Justin

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Ok I get you. But isn’t the butterfly intake a headache with the +T?  see this is my plan so far but please advise me into the right direction.  Nistune Ecu, 1000cc Bosch injectors, TD05 or TD06 Kinugawa turbo using stock rb25det exhuast manifold, walbro fuel pump unsure of model I think it’s 450/460, spitfire coils and sparks to suit and a R35 MAF sensor and boost sensor.    I was thinking maybe do a cheap eBay plenum $400-500 or try find a stock det neo intake. I think I’d port match it so it’s getting the full capacity but open to advice please.  Thanks 
    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
×
×
  • Create New...