Jump to content
SAU Community

Recommended Posts

is it possible to use a japanese car dvd player in an aussie car?

because they are soo godamn cheap in japan and soo much more advanced,

i know theres a prob with pal/ntsc and might have to get car voltage converter but is that a major problem?

does anyone have experience with this or information

also if i use a aussie dvd player is it possible to buy a japanese screen and connect it ?

thanks

Link to comment
https://www.sau.com.au/forums/topic/133421-japanese-car-dvd-players/
Share on other sites

First of all, can you read Japanese? Although some of the main functions are in English, most if not all the sub-menus will be in Japanese, or at the very least katakana (Japanese script used for foreign words).

When you say 'so much more advanced', what are you refering to exactly? I see that JVC, Eclipse (Fujitsu Ten) etc all have Aussie models for sale here that are pretty much what you get in Japan ie: the Eclipse E400AVZ http://www.fujitsuten.com.au/products.htm (scroll down).

You mentioned they were cheaper in Japan too... well, when buying used electronics from Japan you have to be very careful in that you don't buy something that is on it's way out. Usaully all the decent electronics gear worth buying is either brand new, or near new... with anear new price tag to match. Yes it is still cheaper over there, but factor in shipping costs and no warranty outside Japan (or no claim no return from auctions), and you're almost at the price of a new DVD screen all-in-one 2DIN unit bought from a car audio place here.

Also remember too, alot if not all the ultra cheap stuff in Japan electronics wise is straigh outta south central China. You seriously get what you pay for in those instances, so stick to well known brands IMO.

You don't need a voltage converter, thats only for household electronics.

hey buddy,

i installed a jap one in mine, and its been working fine for over a year now. if u know how to put in a headunit, its exactly the same thing with a couple of extra wires that connect to the monitor

yea i can read japanese that is no problem and i will be buying brand new without shiping as i am in japan at the moment, there is soo much more choice over here and newer models.

hey moonus did u install just a screen or player+screen?

is there no problem with the regions as japan and australia have different dvd region codes,

and is yours pal/ntsc compatible

some more information would be great

thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...