Jump to content
SAU Community

Recommended Posts

Well teh alternator died on dad's cef, so I chucked the VIN into Nissan Fast to see what else I could use. It came back with nothing, which was really odd... I would have thought it'd be the same as an R32 GTSt or something at least.

Anyways, being stranded in Syd I gave Advan (closest workshop to my parent's place) who told me to give SSS Automotive a call for spare parts, and they found a second hand alternator on the shelf with the exact same part number... and it came out of an R31 skyline. The guy who was on the phone, then told me they had been dealing with cef's for a while, and that most of the ancillaries and even the engine was identical to the R31's (I'm assuming the GTS-R's).

Well fancy that... my old man drives a newer model Pintara! I'll keep that in mind when I give shit to R31Nismoid about driving a box.

Oh yeah, thumbs up to SSS Automotive too. Ended up gettin a brand new alternator instead of a secondhand one (hey, dad's money not mine)... but they seem to know they're stuff.

End cost: $360 for parts and labour. I seriously cbf working in my parent's garage with bugger all tools to do it myself, even if it is only 3 bolts and a plug.

Link to comment
https://www.sau.com.au/forums/topic/133576-altenator-change-on-teh-cef/
Share on other sites

Tell u on monday morning when i've got the bill exactly how much it cost. It was thru a local auto elec who specialised in bosch and hitachi alternators (ceffy one is a hitachi).

how's that for customer service...

I initially rang Just Jap as well to see if they could help me out while chasing prices on an alternator.

They just called me to find out how I went and to see if I needed anything else.

I'll have to pop in and see em now... they sound like a good bunch.

Just picked up the car, and works like a charm.

Ended up getting a brand new Bosch BXN1231 fitted for $400 from High Auto Electrical Service (27 Hope St Ermington 2115 NSW... 02 9874 4135).

The BXN1231 is what came on late model VL's and R31's, the earlier models came with the same Hitachi LR180705B... which is the same as the one on the cef. So it wasn't much hassle to change to the Bosch one, which comes with a one year australia wide warranty.

Urgh. Old man's insistance on fitting brand new parts as replacement sometimes amazes me. If it was me I'd have just chucked in a secondhand R31 unit for $50 in the backyard with a 12mm. :down:

I am one for new parts :O

I figure if I replace everything brand new then it wont break again in a hurry, but a second hand item might go to shit one week later.

Thanks for the part numbers :dry:

you got that right.

original alternator died in the the middle of brissie at midnight. :)

threw a 50 buck second hand alternator on. it shat itself a week later, car was stuck down at springwood for a week before i got a autoelec to put on a new one. working okay for 250 bucks (no labour costs) :O

you got that right.

original alternator died in the the middle of brissie at midnight. :P

threw a 50 buck second hand alternator on. it shat itself a week later, car was stuck down at springwood for a week before i got a autoelec to put on a new one. working okay for 250 bucks (no labour costs) :(

yeh think i would fit it myself...might start saving for one haha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...