Jump to content
SAU Community

Recommended Posts

Hey guys,

Just wondering if you can give me an idea of what might be happening with my car

94 GTS25T Mods: Exhaust, Cooler, Pod and Power FC only use BP Ultimate and Royal Purple Oil

thursday night i had an intercooler pipe pop off and the car stalled was a little hard to start but once going again all seemed fine.

I did an oil and filter change on friday night also put on new silicone hoses for IC pipe

i feel as though since saturday night the car was running a little rough then lastnight late (was quite cold night)

i was heading home and the engine light was came on at 4500rpm the knock reached 136 so i babied it home

let it cool down for an hour while i stood there looking at the engine like a fool took it fo another short drive and the same thing happened

I did to put a bottle of Nulon Injector cleaner in my tank on saturday not sure if this could have anything to do with it though?

on the way to work today i did take it really easy but got the revs upto about 5500 twice which saw knock reach 35

so yeh any ideas on what the reason for the knock getting so high? Is it safe to drive it like this?

I think the car has not been tuned for atleas 15,000ks mabye even 20,000k could this be the reason - do cars just get out of tune??? or is this likely to be something more mechanical like a broken/melted/worn part?

cheers,

Dan

Edited by dano4127
Link to comment
https://www.sau.com.au/forums/topic/133794-knock-136/
Share on other sites

paulr33 - i just read that whole article awesome work now i feel like i need to go lay down to take all that information in!

i think i will take it to someone to get it tuned as i would like to put in a Z32 AFM, new fuel pump and mabye an AVCR then i can get it all setup at the one time and get the car fully retuned

you just seem to hear so many varied opinions on who to get to tune you car it is so hard to know who to trust!!!

Link to comment
https://www.sau.com.au/forums/topic/133794-knock-136/#findComment-2480793
Share on other sites

Cold = more knock? I thought knocking was a heat issue in the first place since its basically early combustion? Have i been looking at it backwards the whole time?

its both.

Cold air = More air = leaner more unstable mixtures = Knock.

Heat soak or hot air = hot fuel = unstable mix = knock.

you need to get it somewhere in between, or tune the car on a stinking hot day, and you'll never knock out in the cold.

Thats how I tune my car.

Also, cold air can make your turbo boost an extra psi sometimes, and lean the car out, causing knock. Get an electronic boost controller.

Link to comment
https://www.sau.com.au/forums/topic/133794-knock-136/#findComment-2484935
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
×
×
  • Create New...