Jump to content
SAU Community

Recommended Posts

RB25DET Cylinder Head

Ported

1.5 - 1.8bar

HKS Fcon Pro-V

Stage 3 HKS Cams 275 deg duration.... bigger than standard lift i dont have the figures with me im working til midnight :huh:

not sure on followers i know valves retainers etc have all been replaced with aftermarket parts.

Internals are trust built, forged pistons rods, aftermarket bearings, prepped and balanced crank etc

No dyno graph unfortunately :laugh: had one from when it was still in japan but its been lost.

Rev Limiter is set at 7200rpm as it sits, it wasnt during the tune (im conservative :blush:)

Hope that helps.

OK, you have a lot of money invested in the RB25 cylinder head, to much to throw it away (and use an RB26 cylinder head). My understanding is that you are going to make an adaptor so that you can run the RB26 throttle bodies, as you need the response. The standard RB26 plenum has proven to be very effective up to ~600 bhp. Over that, the common choice is the Nismo plenum, a number of people (Mines, HKS etc) utilise it to good effect for circuit use.

For drag use there are a number of single throttle body plenums that will do the job, but the huge volume of the plenum and the distances (from the inlet valves to the single throttle body) are not good for throttle response.

:laugh: cheers :laugh:

OK, you have a lot of money invested in the RB25 cylinder head, to much to throw it away (and use an RB26 cylinder head). My understanding is that you are going to make an adaptor so that you can run the RB26 throttle bodies, as you need the response. The standard RB26 plenum has proven to be very effective up to ~600 bhp. Over that, the common choice is the Nismo plenum, a number of people (Mines, HKS etc) utilise it to good effect for circuit use.

For drag use there are a number of single throttle body plenums that will do the job, but the huge volume of the plenum and the distances (from the inlet valves to the single throttle body) are not good for throttle response.

:3some: cheers :)

Exactly hence why I went for the ITB setup... the only thing that concerns me if I opt for a Nismo Plenum is that I will still be utilizing standard runners. Should I invest the extra money in getting aftermarket runners to suit the plenum or will standard suffice???

Currently talking to ISL33P about runners/plenum anyway might see if he can get them separately.

Exactly hence why I went for the ITB setup... the only thing that concerns me if I opt for a Nismo Plenum is that I will still be utilizing standard runners. Should I invest the extra money in getting aftermarket runners to suit the plenum or will standard suffice???

Currently talking to ISL33P about runners/plenum anyway might see if he can get them separately.

Standard throttle bodies, with the inlet manifold match ported to the cylinder head = 750 bhp no problems. Way more than you should be using for your purposes.

:3some: cheers :)

Here's a question for ya.

Has anybody ever used an RB26 throttle body setup with 6 throttles and all the shiznet on an RB25.

What are the results? Worth the effort?

Just out of curiosity

Here's a question for ya.

Has anybody ever used an RB26 throttle body setup with 6 throttles and all the shiznet on an RB25.

What are the results? Worth the effort?

Just out of curiosity

This is what I am in the process of doing right now, you require an adaptor and apparently it is very worthwhile.

I have a friend (Rick from Adrenalin Motorsports) that runs a 700hp+ RB25 R33 with a T78 and has a similar setup to what I will be running. He swears by it. (pretty sure most of his stuff is aftermarket though)

Will definitely keep you posted on results, I'll also be looking into selling the adaptors in Australia as the only place you can get them is Japan unless you wanna have them custom made which = $$$$ :( If your interested let me know, the first run will be limited numbers only just to guage interest.

  • 3 weeks later...
500hp at the wheels and full boost by 3500rpm are you sure? Is that possible with such a big turbo?

My stock turbo doesnt make full boost until 3000rpm.

It's possible when you buy quality parts and don't skimp on the important things. The car in question is my old R32 and has ATLEAST $25k spent on the motor. The head alone is a joke, and realistically is really is an overkill for a T67.

The results speak from them self however, huge power, huge turbo and full boost at only 3500 - 3800rpm.

Have fun James, with the power you want to achieve you’ll get there, while all the “race kiddies” are still waiting for full boost at 6000rpm.

Edited by Nismo_Boy
Here's a question for ya.

Has anybody ever used an RB26 throttle body setup with 6 throttles and all the shiznet on an RB25.

What are the results? Worth the effort?

Just out of curiosity

I can't remember where I saw it but I have seen adaptor plates for the RB26 ITBs to bolt onto the RB25 head... from memory they were made by HKS or Nismo or one of the big jap companies...

...tempting hey Bass :huh:

We have been heavily promoting the PLAZMAMAN range of plenums, not purely because they aesthetically look good, but they are backed by years of knowledge, Research and development, and continuous testing.

We're off to DUBAI in the coming weeks and will be taking several of these plenums with us to show their quality, design to the rest of the world.

Its not just about having a HUGE japanese brand name, its about being able to deliver the goods and in this case the performance and effectiveness of upgrading to an aftermarket plenum

We will have our own adaptors in the coming weeks

Thanks

Tarek

RACESPEC

Will do

I speak to quite a few of the workshops and individuals on MSN, and the amount of money invested into cars over there is crazy.

They are Turbonetics crazy over there aswell, and everything HAS to be BRAND NAME, otherwise, they wont use it simply

Tarek

RACESPEC

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...