Intercooler Install Help!

[bubz]

Hey guys

fistly i'm new to SAU, have a '94 R33 and have a FMIC, need some help to have it installed. anyone able to help??

thanks in advance

[performance-wise]

Are you installing a kit (with pipes etc...) If so, what kind?

[bubz]

Hi ordered the kit from CRD (on SAU) - Tube and Fin Intercooler kits.

[performance-wise]

pm me ur email addy and I'll send you an installation guide.

[someonestolecc]

It shouldn't be too hard but you'll need to be good with an angle grinder for the hole, depending on the kit piping route.

It's basically plug n play. The only advice I can give you is to make the holes slightly wider than the pipe so you have some play incase you need it to line the FMIC up directly in the centre. Otherwise try to copy someone elses placement of the holes as I've had kits that don't QUITE line up properly (a couple of mm's on each join means your FMIC isn't mounted centred EXACTLY).

If you get stuck click some photos and post them here I'm sure we can help somehow

[mad082]

if it is a hybrid style then you will need to trim the fan down. the best way is to make a template so that you cut each blade the same.

[mattis96]

hey guys, sorry to hijack your thread, but i am also installing an intercooler kit tonight to, and just wondering what do you do with the vacumm line that is on the standard piping which go's to the boost controller? the piping kit i have doesnt have a nipple to connect the hose to? thanks

[RPR33]

I had to run another as my intercooler piping had none either just t off of somthing else I use the line going to the fuel rail thingy!!

[mattis96]

anybody got a picture that could help please, had a look but didnt know what hose you meant?