Jump to content
SAU Community

Recommended Posts

This kit is mostly new and was going to go on my R32 GTR. Unfortunately I can't afford to keep this kit and do other mods so I have to put it up for sale :P

Location: Adelaide, can ship interstate.

New External Wastegate $150

- 50mm

- 4 bolt flange

- gasket included

New custom polished high mount manifold $500

- T4 flange

- ported and polished with tuned length runners

- gaskets included

- High quality stainless steel with TIG welding

- External gate doesn't have to be used

manifold-wastegate1.jpg

manifold-wastegate2.jpg

Dump/front pipe with 4 bolt flange to suit high mount manifold $100

HKS Y intake pipe $150

intake-dump.jpg

New Adjustable Fuel Pressure Regulator with gauge $50

fpreg1.jpg

fpreg2.jpg

New Oil catch can $50

catchcan.jpg

PM or email [email protected] for details

Thanks

Wegs

Edited by wegs
** looking to put my money into coilovers and wheels so if the right thing came along i would consider trade**

:happy:

You need to get your priorities right :D

Seriously man, I would keep and install that kit, if you don't want to do the single turbo conversion sell the T51 but keep the rest I would :sick:

Tell me about it ;) I would love the chance to fit the kit and scare the daylights out of passengers (as well as myself) but it's a bit out of reach and i'm more happy with getting some 19"s instead.

More details for parts sourced and all parts now itemised with seperate pricing (all below replacement cost). Manifold and gate don't have a brand marked on them. I have found the wastegate is a cheap option and marked price accordingly. Manifold is very well made with stainless steel and neat welds.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...