Jump to content
SAU Community

Recommended Posts

hey guys, ive been trying to get my car started for the past 2 days and still no go. first i thought it was the battery because it was dead and after i had charged it, it wouldnt take any load. i then changed the battery and still the same prob.

anyone ever had a problem like this before. to me it seems like its electrical because its firing but kinda sounds like something is cutting it off as it starts.

Thanks, Mike.

Link to comment
https://www.sau.com.au/forums/topic/134828-car-wont-start/
Share on other sites

Does a fuel pump have a fuse?Did you check for petrol? :laugh::laugh:

Sound like an electrical short ...check coils and plugs.

Then check if you can hear your fuel pump working.

Also sounds like a blown fuse...check your fuses.

Link to comment
https://www.sau.com.au/forums/topic/134828-car-wont-start/#findComment-2506619
Share on other sites

failing that, disconnect the AFM and then start it up with half throttle. If that works, you have a dead AFM.

Turn it off afterwards, cause you shouldn't run it for long like that.

Edited by RANDY
Link to comment
https://www.sau.com.au/forums/topic/134828-car-wont-start/#findComment-2507319
Share on other sites

Could be no vacuum in the aac valve, at the back of the plenum near the bulkhead

if it sticks open it can cause a vacuum leak at low revs and cause a stall, or it could stop it from starting at all.

Hey mate, are you saying that my aac valve could be stuffed or something in my plenum?

Link to comment
https://www.sau.com.au/forums/topic/134828-car-wont-start/#findComment-2510019
Share on other sites

Heres a DIY from these forums

Normally this wouldn't cause your car to not start unless there was consistently no vacuum, however I recently had some issues with Idle hunting and occasionally the car firing but not starting, and this seemed to solve my problems.

http://www.skylinesaustralia.com/forums/in...110431&st=0

Edited by Mike_
Link to comment
https://www.sau.com.au/forums/topic/134828-car-wont-start/#findComment-2512160
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
×
×
  • Create New...