Jump to content
SAU Community

Recommended Posts

Now that my baby has gone to live with someone else it's time to clear a few things out of the garage and this is a big one :thumbsup:

It's an R32 GT-R Boot Lid with the holes welded up and the outer surface re-painted in factory Nissan Black Pearl Metallic ( under side in original black ). All work professionally carried out by spray painter.

In EXCELLENT condition !! Just swap your lock assembly over and away you go !!

Will fit R32 GTS-T and GT-R ( maybe GTE & GTS also ).

SOLD

post-2420-1158615469.jpg

post-2420-1158615482.jpg

post-2420-1158615559.jpg

Link to comment
https://www.sau.com.au/forums/topic/134895-r32-wingless-boot-lid/
Share on other sites

is ther any dif between the gtr bootlid and gtst. would it fit on gtst??

No difference in fitment. GT-R & GTS-T are interchangeble. :D

This boot lid came off a GT-R and as you can see by the pic, it's a perfect fit on my GTS-T :thumbsup:

both steel.

GTR boot frame (under skin) is slightly different to the GTSt, as the GTSt has to have access in the centre for the middle wing support.

externally the same, and as FAT32 has mentioned, they fit exactly the same

:thumbsup:

most gtr parts are lighter than gtst parts? Is this gtr boot made of alluminium or is it the same as a gtst?

I'm almost certain that it's the same boot lid for both models just with a different wing and holes ( happy to be corrected :D )

One that happens ( and I really liked ) is that when you normally pull the boot release latch, the boot lid pops open about 10mm, but with this boot lid ( without any wing ) it fully opens when you pull the release latch. :thumbsup:

both steel.

GTR boot frame (under skin) is slightly different to the GTSt, as the GTSt has to have access in the centre for the middle wing support.

externally the same, and as FAT32 has mentioned, they fit exactly the same

:D

And there you have it !! :O

Cheers Ronin :thumbsup:

Thanks everyone for your enquiries.

To all who are waiting for me to tell them the interstate shipping cost, I'll do my best to get on it this afternoon ( sorry but really busy at the moment ).

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...