Jump to content
SAU Community

Recommended Posts

Was wondering if anyone can help me get my car started,

Its an R30 skyline with EFI'd L24 engine it in, i seem to be getting pretty good spark - but not sure about the fuel,

I cannot hear the fuel pump when car is on accessaries or start, i also removed the line from the fuel filter (in the engine bay) there was fuel in the filter, but i was thinking fuel should piss out when i turned the key to acc or start? this did not happen..............

Anyone got any suggestions?

Link to comment
https://www.sau.com.au/forums/topic/135033-car-wont-start/
Share on other sites

Was wondering if anyone can help me get my car started,

Its an R30 skyline with EFI'd L24 engine it in, i seem to be getting pretty good spark - but not sure about the fuel,

I cannot hear the fuel pump when car is on accessaries or start, i also removed the line from the fuel filter (in the engine bay) there was fuel in the filter, but i was thinking fuel should piss out when i turned the key to acc or start? this did not happen..............

Anyone got any suggestions?

Check relays and fuses, if all ok check power to the fuel pump. All ok probally fuel pump.

Link to comment
https://www.sau.com.au/forums/topic/135033-car-wont-start/#findComment-2513097
Share on other sites

Had a similar problem a while ago; It was a dying fuel pump. I extended the life of the pump with a 15" adjustable wrench - just give the pump a tap or 2, and it might jump back to life for a while.

Link to comment
https://www.sau.com.au/forums/topic/135033-car-wont-start/#findComment-2513439
Share on other sites

  • 4 weeks later...

I have the exact same problem with my L20ET, and have had many a auto spark look at it whilst straching their heads.. i can tell you that it will either be the ecu (old/dry soldier joints), the relays/fues. The problems that develop with those old ecu's is a strange one because it wont do the smae thing twice.

the ecu just simply wont send any signal to the relays/vaccum sensors (one over next to the left strut) or in my case to the shitty little computer in the boot that apparently controls fuel and boost signals.

good luck.

try resetting the computer by disconnecting the battery for a little while, a good spray in the fuse box with some water dispersent, and kick the ECU in the guts a few time if theat doesn't work

post-32191-1160703955.jpg

Link to comment
https://www.sau.com.au/forums/topic/135033-car-wont-start/#findComment-2579574
Share on other sites

I have the exact same problem with my L20ET, and have had many a auto spark look at it whilst straching their heads.. i can tell you that it will either be the ecu (old/dry soldier joints), the relays/fues. The problems that develop with those old ecu's is a strange one because it wont do the smae thing twice.

the ecu just simply wont send any signal to the relays/vaccum sensors (one over next to the left strut) or in my case to the shitty little computer in the boot that apparently controls fuel and boost signals.

good luck.

try resetting the computer by disconnecting the battery for a little while, a good spray in the fuse box with some water dispersent, and kick the ECU in the guts a few time if theat doesn't work

Sorry to hijack this thread, but David I don't see you on the Classic Skyline register yet.

But my main question, is your 4 dr a Paul Newman Version or stock HR30, as we are trying to locate a 4dr version, last seen in Qld.

Cheers, D

Link to comment
https://www.sau.com.au/forums/topic/135033-car-wont-start/#findComment-2579724
Share on other sites

  • 4 weeks later...
Sorry to hijack this thread, but David I don't see you on the Classic Skyline register yet.

But my main question, is your 4 dr a Paul Newman Version or stock HR30, as we are trying to locate a 4dr version, last seen in Qld.

Cheers, D

Checked the fuel pump computer? Mine wouldnt start for 6 months because that damn computer was stuffed.

Link to comment
https://www.sau.com.au/forums/topic/135033-car-wont-start/#findComment-2641640
Share on other sites

  • 4 months later...
Sorry to hijack this thread, but David I don't see you on the Classic Skyline register yet.

But my main question, is your 4 dr a Paul Newman Version or stock HR30, as we are trying to locate a 4dr version, last seen in Qld.

Cheers, D

I used to live in QLD on the Sunny Coast and took it dow to Brissy and the Goldie a fair bit..

Now i live in Melbourne and still have the car..

I've got an early (year not exact '81-83) 4 door HR30 GT with an L20ET dark blue/black with gold work ewing rims on it.

contact me via email you want to know anything else

[email protected]

Link to comment
https://www.sau.com.au/forums/topic/135033-car-wont-start/#findComment-2957140
Share on other sites

Sorry to hijack this thread, but David I don't see you on the Classic Skyline register yet.

But my main question, is your 4 dr a Paul Newman Version or stock HR30, as we are trying to locate a 4dr version, last seen in Qld.

Cheers, D

I should be on the classic register, i attached some pics

Link to comment
https://www.sau.com.au/forums/topic/135033-car-wont-start/#findComment-2958985
Share on other sites

post-32191-1173238290.jpg

Checked the fuel pump computer? Mine wouldnt start for 6 months because that damn computer was stuffed.

mine has a computer in the boot that apparently controls the fuel pump and turbo (boost volumes?)

I'm in the same boat, needing a new ECU as mine is getting very tempremental these days.

Link to comment
https://www.sau.com.au/forums/topic/135033-car-wont-start/#findComment-2960077
Share on other sites

  • 3 weeks later...
post-32191-1173238290.jpg

mine has a computer in the boot that apparently controls the fuel pump and turbo (boost volumes?)

I'm in the same boat, needing a new ECU as mine is getting very tempremental these days.

yeh controls fuel.

mate...have you got gas? I dont mean to sound rude but soemtimes fuel gauges can play up if you dnt have much in the tank

Link to comment
https://www.sau.com.au/forums/topic/135033-car-wont-start/#findComment-2999477
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...