Jump to content
SAU Community

Recommended Posts

My car received its 100,000klm service the other day and I'm just worried that I am being ripped off. How much should I be paying for the individual parts he has changed? Your responses are appreciated.

EDIT: The total cost of the service was $1097.80

Items changed include:

Timing Belt -

Idler Bearing -

Tensioner Bearing -

Crank & Cam seals -

Water Pump -

Thermostat -

Top & Bottom Radiator Hoses -

Coolant -

I have attached a copy of the invoice he gave me for your perusal.

Link to comment
https://www.sau.com.au/forums/topic/13570-have-i-been-ripped-off-100k-service/
Share on other sites

yeah, thats about standard for most cars, and most cars need a 100,000km service of some type - so its probably not way too over the top.

That includes a fair vital things such as water pump, and timing chain... it probably is fair

just for reference my 100k service cost

$650

spark plugs, fuel filter, oil filter, oil changed, timing belt, coolant, pipes checked

where yours cost so much would be the water pump and all the other parts that were changed in your service. did they really need to be changed??? ask yourself that.

they used cheap oil, and coolant so watch that

Originally posted by skyzerr33

timing belt is only $100 from nissan.

they didn't even do the gearbox and diff oil change but that usually gets done at 80k service

Yeah the gearbox was recond under warranty last month and all fluids changed at 80,000kms.

I suppose I didn't have to get the water pump changed but I thought that gets changed at a 100k service?

I suppose I didn't have to get the water pump changed but I thought that gets changed at a 100k service?

Depends on your water pump. Mine decided to retire at about 100,003kms, and hence my car went for service.

All up, I had engine oil & filter, spark plugs, water pump, timing belt, cam seals, crank seal, coolant & water, air filter, and a new radiator hose, all up parts and labour came to $820

An ordinary car can also rack up similar 90,000/100,000km bills.

My mum's Magna just had a $1,262 90,000km service.

Water pump, brake pads, timing belt, cam cover seals.... usual lubes.

I haven't had my 33 done yet but I am dreading the cost.

Hopefully I can do enough small repairs up to the big service (ie. timing belts, box/diff oil etc.)

T.

Thats a pretty good price, the tensioner bearings etc for the timing belt are pretty expensive. The water pump definately needs to be changed as well. Also new radiator hoses from nissan are about $50 each as well. Better to spend a little extra then the chances are you wont have any trouble for the next 100,000km if the regular stuff is performed.

why not do yourself what you can and then get the mechanic to change what you can't - save yourself $$$ and you know exactly what goes in and how much it really costs rather than just what they have told you.

i have a mechanic which i only go to if i can't do it myself (but he's a friend and does it cheap anway!)

Labour at $180 seems pretty cheap to me considering what they did, that's only about 2 or 3 hours work. The parts cost though I've got no idea.

Do the idler and tension bearings really need to be changed? Even though my timing belt was done at about 80k, I'm wondering if at the 100k I should also do the bearings.

If he's a good friend of your dad's then I doubt he'd rip you off on the parts if he did a good price on the labour. The bearings and seals must have cost the most. Timing belt, 2 hoses and thermostat shouldn't cost more than $250 or so combined.

I'd be a bit worried about that oil though, if he's used standard pricing on that like most other workshops do you'll find that he's probably put in something inferior to the GTX2 you can buy in Woolies. If however he's charged as if you bought it from Auto 1 or the like then it'll be a high grade mineral oil or an average grade semi or full synth. Try to find out what he's put in exactly.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...