Jump to content
SAU Community

Recommended Posts

Hi,

I am currently driving a 1998 Nissan Skyline R34 25GT in a Semi-Automatic. It should run around the 150kw mark and all I have is a K&N air filter. I am also currently on my red P's, first year which means that I can't have any modifications done to my car - not that I'm gonna follow.

Anyways, what mods can I install to boost up my car - which is also not too obvious to the boys in blue

Cheers.

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

id be interested in this as ill be in your exact situation very soon, im geting my license back after a speeing offense, so ye im on my red ps, im gonna buy a semi auto r34gt, ive got a mate who does performance nissan gearbox's, but im not sure if this would do much to a standard 25gt?.. anyways, how is the car? do they have enough power for every day use and a lil bit for sum added fun every so often ??

You can get a shift kit to make it a bit less sloppy on gear-change.

Decent exhaust, porting and cams...maybe something like the new e-manage ultimate to trim the fuel and increase timing and raise the rev limit.

hey 666dan wat do u reccon all that would cost champ? do you think a shift kit would make a noticeable difference to the standard tip tronic, and with all this any chance of keeping up with our turbo buddys?

The shift kit would definately help, used to have a 25GT and would have liked crisper shifts in it.

I'd say for cams, porting, e-manage + tune you'd be looking at $3500 at the very most, some good shopping around will drop that price for sure. While you've got the head off the car, would maybe be worth having it decked and put the compression up a notch. You'll only be able to use 98+ octane though.

An exhaust can vary greatly, my CES exhaust was $2K, but it is awesome :blink:

I think you may be competative with stock GTts for sure, you've got about 100kg weight advantage over them.

Get one of those SS Turbo kits that put the turbo under the car at the rear; the cops will never know where to look :blink:

I'd save the money for mods and wait till you get off your Ps then upgrade to a GTT :D

hey santic, u reccon it would be hard buying a stock 25gt-t and changing that turbo rocker cover?? lol cops prob wouldnt know the diff, how do u go around registing a turbo as a non turbo shifty styleS? btw no way i can wait 3 years, how much do those turbo kits cost u were talking about

One from SS Turbo (I think that's the name of their company) is about $10k :no:

Don't think they do it for Nissans; I've only ever seen their work on a Holden Commdore (single blower out back) and a BMW M3 (twin blower out back). Both cars were seen at the Auto Trade Fair a few months back.

Does anyone have a link for one of these shift kits? How does it work, a more aggressive/high revving gear shift programing with transmission cooler?

I wouldn't want a high stall on my auto since that would make fuel consumption go down the drain hole!

the shift kits just make them change gears quicker. they don't give you more power.

as for mods, get a set of extractors, and a full exhaust. that should give you noticable gains, but your car will be noisey. probably louder than a turbo, depending on how many mufflers are in the system. but it will sound sweet. then just something like a safc2 to control the fuel.

shift kit - gear changes are crisper/ quicker and the auto can still change gears by itself

manual valve body - everytime you need to change gears, you need to move the stick (it will not change by itself)

kool thanks sloazr33 , wat do u guys recomend ? shift kit or manual valve body ?

Well imo, your auto for a reason (to be lazy) if you want to change gears yourself, buy a manual or convert yours.

definately a better way to go, but if you awnt to keep the auto, then its obvious, you just want a shift kit

its really a personal prefrence... if the skyline gearboxes are anything like the infinity which im pretty sure they are... you dont actually modify the valve body to manualise it rather an extra control bypasses the operations of the auto computer... about 60 bucks from MV automatics.. but with out a shift kitted valve body the shifts are still slow and sluggish.. Depending on how far u go with the shift kit u can make autos chirp gears during shifts just like manuals...

you've already got a tiptronic by the sounds of it, so just go a "stage 2 shift kit" which simply firms up gear changes.. basicalyl makes gear changes instantaneous so it chirps between gears on full throttle... do a search for more info i have posted the results of when i did this

for "hidden" mods, i would suggest...

exhaust: extractors and cat, but with stock cat-back. if its loud, it will be obvious that its modifed

intake: new air filter and cold air intake

head: adjustable cam gears

computer: some kind of adjustable management. try the SAFC2 for a cheap option

this will take base power from about 110rwkw in stock form to maybe 125rwkw. don't expect much more without big $$$ being spent. unfortunately you don't see the gains that you get with a turbo car...

best of luck,

Warren

for "hidden" mods, i would suggest...

exhaust: extractors and cat, but with stock cat-back. if its loud, it will be obvious that its modifed

intake: new air filter and cold air intake

head: adjustable cam gears

I dissagree (with the exaust only) there is alot of restriction in stock exausts, its not just pipe size, also flow etc (stock mufflers now being old on alot of cars, and they were cheap and basic to begin with) you can give a car a sports exaust and still have it quiet, and still get the gains, alot of the time, the sound is jsut because people want it, because it makes the car sound powerfull.

If you go to an exaust shop and you say you want the car to sound stock, but have a high flowing system on it, they'l do it happily, it just requires some mufflers a bit bigger.

Say a large resonator and a large high flow muffler with no tip (i.e. ending in normal piping) it will just look like you have had your exaust replaced, due to age or some other problem etc (and after a few months you wont even notice its new) and it will be quiet as, infact you could have a happy medium, like a tiny bit of a note, very quiet, nothing to turn heads, but just a nice sound.

And as for Stock looking mods, pretty much ANYTHING internal, Like Raising compression (if your sticking with N/A) by shaving the head/block or changing pistions, porting and polishing, lightweight gear, a mild cam...

etc, as long as you keep the engine tidy, but stock looking (like no chrome shit etc) if the boys in blue ever ask you to pop the hood, and they see a stock looking engine staring back at them, they wont hasstle you.

Things like keeping an airbox (maybe a bigger better one off another car) if you change the intake piping, paint it black, not chrome, you can still run a K&N filter etc...

go the sleeper

mate i disagree completely..

not on what you are saying, because you are right and i know that its not goign to flow great

but for this particular guy who wants it to look stock not just sound stock. an aftermarket exhaust will look aftermarket. all you have to do is look under the car and hey presto there's teh exhaust! cops aren't bright and don't car that its quiet if it looks aftermarket

for that stealth look but trying to get some more power, stick with the stock cat-back.

after all, its an NA car and won't respond to exhaust mods like a turbocharged car

horse for courses, and for this particular application its got to be the way

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
    • Regardless of neglect or incompetence, fixing either is tedious and annoying. Most of the neglect on my car is definitely rust. I hope I can at least pass inspections later on and they won't fail the car due to slightly corroded hardlines. I was generous with rust converter and wax and it looks ok, most lines in the rear are hard to see properly anyways.  Definitely will test them though to make sure they don't rupture under pressure, in that case the car isn't going anywhere this year.
×
×
  • Create New...