Jump to content
SAU Community

Recommended Posts

For sale is my beloved R33.

Well the snow this year was terrible and it has taken its toll.. I went of a jump landed wrong and stuffed my knee. i need a bone graft from my knee cap to my tibia. and the medical bills are going to be huge so i have to sell the only thing that means something to me.

Details:

1993 - ECR33.

18 in Wheels ANZ

Green / Blue colour depending on light

Custom Made Boost guage holder (sits on the top of the steering colum)

Pioneer CD player w/ remote

Pioneer 5" slplits in front

6in 3way at the back

800w Amplifier

800w Kenwood 12" Sub

Brand New Battery

approx 126,000kms

5 Speed Manual - MOMO gear knob

Alarm / Keyless entry

MOMO steering Wheel

The following mods are done

Boost to 9psi - Bleed Valve

Front Mount Intercooler

Cold Air Intake

Pod Air Filter

3.5in Exhaust

Turbosmart BOV

Dash Facis Painted Silver

Current Issues

Front bar is currently being fixed as i had a small crack in the front so its getting reinforced.

Gutter scrath on one wheel about 5cm long 1cm wide

Small tear on gear knob leather.

Other than those listed the car is in great condition and has about 9months registration.

Regulary serviced and maintained.

Car is located in near Parramatta NSW.

Will Consider swap for another car. email me if interested.

If you would like to see the car or ask any questions please email me at [email protected]

Best offer around $15500

post-4248-1159257406.jpg

post-4248-1159257448.jpg

post-4248-1159257464.jpg

post-4248-1159257489.jpg

Edited by Eav00l
Link to comment
https://www.sau.com.au/forums/topic/136124-fs-nsw-r33-nissan-skyline-gtst/
Share on other sites

Hi mate,

Very interested in your Skyline, I live in Melbourne but will travel up to see it. Thats if no offers made as yet. I am just about to finalise my car sale so will be in the market in less than a fortnight or so...

Please give me a call on 0402126798 to discuss things further.

Mark

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...