Jump to content
SAU Community

Recommended Posts

they are not all the same, most of the new stuff uses one controller.

I tried a GTiR AP engineering in my R32 GTR didnt work, there is a list on the japanese apexi site, do a search for power fc hand controller on performanceforums.com for sale section the link is in there.

the powerfc faq (in my sig) covers the different versions of the hand controller models and includes the feature matrix to work out what hand controlled you need.

primarily there are 3 different hand controller models

fcc

fcc2

fcc3

when they are new they have a sticker on the back.

the powerfc also has a model number on it.

from that u can work out what hand controller u need.

ETC, PROG VERSION will tell u what version PFC + Hand controller it is

what PFC is it? from what car/engine?

the ap eng is really an older style rb25 verion 1 pfc.

version 1 PFC needs 414-N007

414-n007 is FCC nt which is multiversion for nissan version 1

someone with an rb26 version 1 FCC should work.

if u can find someone with one of those it should work

http://www.apexera.co.jp/carlife/pro_apexi...ics/linup2.html

on that chart you want someone who has FCC NT

so any of the first gen nissan ones

gtir probably wont work as its a specific sr20 modified to work on the gtir

s1 / s2 r33 hand controller means nothing.

it depends on what version PFC it came from.

if its coming from a newish PFC then it wont work as its the newer style FCC3 so it will just boot to the logo and freeze. you need FCC NT which is the 1st gen R33 so someone who has PFC versiopn 2.x 3x. and 4.x their hand controller will work. someone who has PFC version 5.x wont work

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, I'm not interested in wetting the carpets, and I don't care about brown dirt/dust that lives deep in the pile or underneath. It's not like I crawl around on them in my birthday suit or eat dropped food off them (because there is never any open food in my car). The seats are alcantara (cheap Chinese imitation alcantara, to be sure!) with barely 1" of foam pad behind the surface. That's not getting wet either. Any car that I would be happy to get the interior wet, I would not care to put the effort into.
    • We have one that holds 2.8L of water. On floor carpet that hasn't been touched in 2 or 3 years, will take a minimum of 2 fills of the tank to do a bedroom, and that's going AROUND the bed.   In the cruiser, I used an ENTIRE 2.8L tank, just on the front passenger footwell. But it had some fungus growing, and had been full of mud from being used as a 4WD for many years. I can do that floor again, and it will still pull mud out. However, the water now only looks dirty, not pitch black and leaving full sludge in the bottom of the tank it sucks back into. Oh, and, this is about a $1500 unit.
    • This is mine, works a treat for the cars, suction is good, I use the Bissell clean and protect stuff I have found giving it a good spray and light scrub with the soft brush on the head of the nossle for carpet, and a rub with a microfibre for cloth seats and cloth door trims, prior to another quick spray before vacuuming it up works the best @GTSBoy You would surprised on what it gets out of carpet and seats that actually "look" clean, I recommend that you test drive yours when you have a little time to kill, then post pics of the muddy looking water that I believe you will find
    • I think even the "commercial" capacity ones that you would hire from supermarkets etc wouldn't have the capacity to do all that much in one go. I will go through half a dozen tanks of solution and dumps/rinses of the waste tank for one little 2 seat sofa. Or similar for one 6 footish rug. That's the price you pay for something small that only takes up a bit of cupboard space, instead of something that takes up the entire laundry cupboard or half the shed.
    • Someone needs to copy it, improve it aesthetically, make it DBW ready from day 0 and send it to the motherland Chynah for my relatives to cast it and mass produce it 😅
×
×
  • Create New...