Jump to content
SAU Community

Stereo Installation in an R34

FULOCK

By FULOCK,
in Car Audio & Electrical

 Share

Recommended Posts

n15m0 Grand Master

n15m0

Posted
Posted
ok, found the problem.... long story short, dodgy multimeter!!! lol (thats why you dont buy cheap ones... lol)

and yes i did throw it against a wall!!! lol

next question, is there a factroy hole in the firewall somewhere where i run the power cable for the amp?

and the parcel shelf - how do you take it out? I have these wierd metal brackets right across the speaker holes and they gota go if im gona put speakers in there.

I found the rear speaker cables, they were hidden near the speaker holes and sticky taped ;)

Im planning on finishing this today so i'll post up some pics once its done!

I found out the hard way, you need to remove the rear side pillar cover as pictured. I didn't at first and broke the seat belt bracket. Its a hard pull but it should come out.

post-6973-1160784534.jpg

post-6973-1160785174.jpg

FULOCK Collaborator

FULOCK

Posted
  • Author
Posted

I foud the hole I found the hole!!!! haha!!

FIIINNAAAALLLLYYYYY its done!!!!! :glare::) and i didnt break anything!! bonus!!! :O

Thankyou for all your help guys!!!!

heres a few pics i quickly took with my phone, i'll try take some pics tomorrow morning with my camera in daylight....

I took one of the pics with the face opened when you change cd's, it just clears the gear lever when in 1st, 3rd and 5th which im rapt about!!! i thought it was going to knock the gear lever!!!

post-30514-1160903971.jpgpost-30514-1160904084.jpgpost-30514-1160904119.jpgpost-30514-1160904167.jpgpost-30514-1160904199.jpg

FULOCK Collaborator

FULOCK

Posted
  • Author
Posted
good one...very nice...is tht the new JVC double din unit?

cheers!

yup!! dun know how new it is, but yeah I prefered the double din over the single slide out ones.

thought i'd pop up a few pics of my new baby too!! :O only had her for about 3-4 weeks or so... fair upgrade from a 31

One question..... it picks up radio stations really bad!!! any reason that anyone can think of??

Chris Rogers Grand Master

Chris Rogers

Posted
Posted
cheers!

yup!! dun know how new it is, but yeah I prefered the double din over the single slide out ones.

thought i'd pop up a few pics of my new baby too!! :) only had her for about 3-4 weeks or so... fair upgrade from a 31

One question..... it picks up radio stations really bad!!! any reason that anyone can think of??

waht radio?

  • 1 year later...
turtlepower Apprentice

turtlepower

Posted
Posted

know its a bit late but i just put a new stereo in to fix the shitty radio reception. The reason is in japan they have 2 antenna's 2 different signals or something that's why the stock units have that fm diversity on it and a 2 pronged antenna plug, when i pulled mine apart the moron that installed the signal booster hooked it up to the wrong antenna. only 1 antenna will work u just have to test them. Works perfectlly now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...