Jump to content
SAU Community

Nissan Gtr Coils From R33 30,000kms. Used In Excellent Condition.

glaze
 Share

Recommended Posts

glaze Mentor

glaze

Posted
Posted (edited)

Hey Guys, upgraded my coils to Split Fires and I am selling my Standard Nissan Coils, in good condition. Looking for $75 each or $300 for the pack of 6. I am in melbourne, will post at buyers expense. Call on 0401-004-999 if interested.

post-8487-1159919412.jpg

Edited by glaze
glaze Mentor

glaze

Posted
  • Author
Posted
Hey Guys, upgraded my coils to Split Fires and I am selling my Standard Nissan Coils, in good condition. Looking for $75 each or $300 for the pack of 6. I am in melbourne, will post at buyers expense. Call on 0401-004-999 if interested.

bump

glaze Mentor

glaze

Posted
  • Author
Posted
bump

These came out of R33 GTR engine with approx 30,000kms, great condition all working great before splitfire upgrade. Can get better pics for interested parties. Set of 6 for R32 Gtr & Gtst, some R33s. Thanks.

glaze Mentor

glaze

Posted
  • Author
Posted
These came out of R33 GTR engine with approx 30,000kms, great condition all working great before splitfire upgrade. Can get better pics for interested parties. Set of 6 for R32 Gtr & Gtst, some R33s. Thanks.

Will sell the 6 for $250 as I want them gone, cleaning up house to sell.

glaze Mentor

glaze

Posted
  • Author
Posted
Will sell the 6 for $250 as I want them gone, cleaning up house to sell.

Bump for coil pack in good condition.

glaze Mentor

glaze

Posted
  • Author
Posted
most people are selling them for about $150so you will be pushing to get $250

Gee Thanks for the info. I hope they are in the same condition as mine, then someone is getting a bargain!

Price $250.

glaze Mentor

glaze

Posted
  • Author
Posted
Gee Thanks for the info. I hope they are in the same condition as mine, then someone is getting a bargain!

Price $250.

Bump.

glaze Mentor

glaze

Posted
  • Author
Posted (edited)
Gee Thanks for the info. I hope they are in the same condition as mine, then someone is getting a bargain!

Price $250.

Just want to remind people these are out of aq R33 GTR with 30,000kms and in excellent condition. Little or no Arc marks at all. You dont want to replace and then have to replace again.

Edited by glaze
Beer Baron Grand Master

Beer Baron

Posted
Posted

glaze, lay off the daily bumping mate. read the for sale rules (stickied at the top of the for sale section) and then remember you get one friendly reminder and this has been it.

glaze Mentor

glaze

Posted
  • Author
Posted
glaze, lay off the daily bumping mate. read the for sale rules (stickied at the top of the for sale section) and then remember you get one friendly reminder and this has been it.

Sorry Beer baron, must admit havent read the rules(oops). Will behave myself from now on and thanks for the friendly reminder.

glaze Mentor

glaze

Posted
  • Author
Posted
Sorry Beer baron, must admit havent read the rules(oops). Will behave myself from now on and thanks for the friendly reminder.

Pack of 6 in excellent condition for $230 now.

glaze Mentor

glaze

Posted
  • Author
Posted
Price Drop, $220 for all 6.

Price Drop, need these gone. $200 for 6 or $75 per coil. Excellent condition.

glaze Mentor

glaze

Posted
  • Author
Posted
Price Drop, need these gone. $200 for 6 or $75 per coil. Excellent condition.

Will sell for $190, great set to have in case of one or more going on you if you still have stockies in. Thanks.

glaze Mentor

glaze

Posted
  • Author
Posted
Will sell for $190, great set to have in case of one or more going on you if you still have stockies in. Thanks.

Price drop $180

WogsRus Veteran

WogsRus

Posted
Posted

Hi do you know if these will fit an R33 GTST Series 2 with inbuilt ignitors.

So did you have any arcing out or any problems?

Can you measure the resistance between the Left pin and the Ceter looking at the coils, to see what condition the promary coil is on.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      Kittens in first to claim dominance of the residence, then puppies later From past experience, the other way around can be problematic to say the least  Those weird "Dobby looking"  little kittens are not cheap....LOL
    • MBS206
      NC MX5

      By MBS206 · Posted

      At least yours have parkour down pat. One of mine will still trip over his own shadow and fall over... He's a special type of cat... Ha ha ha
    • MBS206
      NC MX5

      By MBS206 · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      The question then becomes - was there any fluid coming from that hole before you did the rebuild ?    You may not have noticed, of course.   Depending on how you did the rebuild, the possibility has to be considered that somehow (cleaning ?)  fluid entered that hole and is now being 'forced'  out by small movements of the proportioning valve.   From the factory, there's actually a small rubber plug in that hole but with age and under-bonnet heat it's quite common for it to 'go missing'.  That rubber plug is designed to allow the venting process but also to prevent 'stuff' getting to the area (prevent corrosion, etc).   The plug is also not available as a spare part AFAIA. Personally I wouldn't race and buy a new master just yet but keep an eye on the area to see if the 'leak' continues.   If you're concerned about brake fluid damaging nearby paintwork, cable tie a piece of suitable absorbant material over the hole and remove/monitor occasionally.    Operation of the proportioning valve and the brake master itself won't be affected, but also keep an eye on brake fluid level, of course. In terms of a new master, the genuine part is getting expensive, unfortunately.  Amayama is showing AUD900+.   I was searching recently and there's an aftermarket part available from Japan made by 'Parts Assist': https://zenmarket.jp/en/yahoo.aspx?q=BNR32%2bBM50&p=1 Whether it's any good I have no idea, although in my experience Japanese aftermarket stuff is pretty good quality-wise.   The above site allows overseas buyers to purchase stuff more easily from Japan but there are fees and shipping costs, of course.   The original Japanese seller page is here: https://auctions.yahoo.co.jp/jp/auction/p1197401228 Copper/Nickel is fine but I still prefer bundy tube and it's also cheaper.
    • Duncan
      NC MX5

      By Duncan · Posted

      Your chihuahuas look weird!
×
×
  • Create New...