Jump to content
SAU Community

Recommended Posts

Your thoughts,

While riding my bicycle home last night I had a brain wave, whether it being from lack of oxygen to it or something.

I am lead to believe (from information in this forum) that the series 1 turbo cannot be safely boosted above around 12 psi. This seems to be the weak point in the engine system to allow more boost as the usual way to increase boost would usually be a larger or hiflowed turbo. Would it be possible and economic to add another series 1 turbo (as it is relatively cheap 2nd hand) to the system so that both turbos do not have to work as hard to increase the boost to say 18-20 psi? Can the internals of the engine handle that?

Obviously, the following would need to be in place; larger intercooler, air intake, exhaust, upgraded fuel pump and injectors, and an engine management system.

What are your thoughts on this system, possible costs of the added turbo only, and any other constructive thoughts?

Mike

Link to comment
https://www.sau.com.au/forums/topic/13730-2nd-turbo-to-rb25det/
Share on other sites

I think what your thinking of is like the system that those race trucks use where 1 turbo feeds boost into the 2nd turbo's intake thereby increasing the final boost the engine recieves, really wouldn't work on stock R33 turbo's though, and not practical for a street car.

Another idea would be to setup a 2nd turbo after the dump pipe of the first so that both turbo's recieve all the gas flow of 6 cyclinders, hence no extra lag but double the airflow, similar to the Supra twin turbo.

Yeh,

Like I said, it was one of those thoughts that may not have any substance as there was a lacking of oxygen from riding my bike. Just a thought tho'

A 4dr GTR would be great as the cars I buy are required to have certain criterias to be filled (due to the wife's demands) and 4 doors is one of them. Luckily boot space wasn't, but now is. Looks like this cars here to stay.

You can get 4 door GTR's but they cost a bomb. If you're after more power, just sell your old turbo for around $500 and buy a new Garrett for around $2500. It'll work out to be around the same cost as adding another turbo (assuming that's even possible).

Also, for some reason insurance companies don't like twin turbos put onto cars that didn't come that way from the factory. My insurance company don't care that I've got an aftermarket turbo on, but they wanted to be sure that I didn't put a twin setup on. They don't actually care what the single turbo is though! Can't wait until I can afford a T88 ;) For some stupid reason they seem to think that going from single to twin turbo makes it insanely powerful. I didn't bother telling him that it's often the other way around.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
×
×
  • Create New...