Jump to content
SAU Community

Powerfc Hand Controller Broken

The Mafia

By The Mafia,
in Engines & Forced Induction

 Share

Recommended Posts

The Mafia Grand Master

The Mafia

Posted
Posted (edited)

Thought it might be better here because most people runninf forced induction are running a PowerFC.

Anyway - My Handcontroller is broken. The Screen works perfect, but the green back light is now very dim. It lights up when I bend the top of the controller a little.

I've had my mate look at it (he's an electronics engineer) and he says the board might have proken. When you bend the little tabs and take the screen off, and put it back on, and maybe move it to one side slightly it works for a few days and then goes out again.

My main question is though - Does anyone know anyone around australia that fixes them?

Thanks guys

Edited by The Mafia
Link to comment
https://www.sau.com.au/forums/topic/138182-powerfc-hand-controller-broken/
Share on other sites
The Mafia Grand Master

The Mafia

Posted
  • Author
Posted

we checked all of that, the screen isn't actually soldered on - Its held onto contacts via bend tabs.

I've tried moving it around but if you move it too much it touches other "touch pins" and the screens starts to skew a little.

I've even thought of adding external wires over the circut board to get the power up there. Its power to the back lights, not the screen.

James_03 Mentor

James_03

Posted
Posted
we checked all of that, the screen isn't actually soldered on - Its held onto contacts via bend tabs.

I've tried moving it around but if you move it too much it touches other "touch pins" and the screens starts to skew a little.

I've even thought of adding external wires over the circut board to get the power up there. Its power to the back lights, not the screen.

You could probably just use a multi meter to find the live come up the existing wires then just tap into that and re-wire the backlight.

Bl4cK32 Grand Master

Bl4cK32

Posted
Posted (edited)

Cubes has his Pfc fixed by force electronics (here in Adelaide) so they would be able to fix the hand controller no probs.

Im suprised your mate cant fix (or doesnt want to :laugh:) but any -good- electronics place should be able to fix it....

Have u seen the controllers with blue led's in them...looks good i think :D nice mod i might do one day

Edited by Bl4cK32
The Mafia Grand Master

The Mafia

Posted
  • Author
Posted
Cubes has his Pfc fixed by force electronics (here in Adelaide) so they would be able to fix the hand controller no probs.

Im suprised your mate cant fix (or doesnt want to :dry:) but any -good- electronics place should be able to fix it....

Have u seen the controllers with blue led's in them...looks good i think :P nice mod i might do one day

awesome.

Do you have their contact details?

My mate could fix it, but its probably better I get some people that have dealt with them before to fix it. He said he could and to bring it back to him if I wanted it to, but he lives next door to my ex girlfriend lol.

And besides, this force electronics place might know exactly what the problem is.

  • 1 month later...
Cake Mentor

Cake

Posted
Posted

Mine has done this twice, and both times it was when the car has been parked in the sun on very hot days. The screen becomes nearly unreadable. Once it cools down it's fine again... how strange.

James_03 Mentor

James_03

Posted
Posted
no thats a very bad idea because they may use different voltages.....take it to a electronics repair place or if you said your mates a eletronics enginerr he should be able to fix it easy as for you.

no its not a bad idea because you use a multi meter to find the correct voltage.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...