Jump to content
SAU Community

Recommended Posts

1) Location ; Northside Brisbane.

2) Price ; $450

3) Detailed item description ; This box is in excellent condition it has been in my car for about 3 months now, when i bought it i got a recipt for the refresh it had (syncros, seals) but i've lsot that now.

This box has close gears, much closer then a standard 5 speed, would suit someone rallying perhaps?

The ratios are nice and short but as soon as i got onto the highway it was revving a litle to high,

I just picked up another box today as i'm more of a highway cruising person.

Comes with shifter/all sensors does not crunch gears at all this box is in VGC, anyone interested has probably a couple days to see it driving in the car as i'm pulling it out thurs/fri.

4) Contact details ; PM on here, i visit the site every day.

Posting this for my house mate.

Link to comment
https://www.sau.com.au/forums/topic/138226-rb20-close-ratio-gearbox/
Share on other sites

With my 3.7' gears, it was at 3000rpm in 5th at 100.

Not sure what they are at all, here is a estimation of each gear keeping in mind the rb30 revs to about 5500rpm (safely) and yours will rev moer if you have a twincam.

1str, 48km @ 5500

2nd 93km @ 5500

3rd 125km @ 5500

etc etc.

so this has just come off an RB30 motor? turbo or non turbo? is it ment to be an R32 box?

thanks

Yes mate came of my RB30 turbo motor was on there for a few month.

It was of a RB20 and has all the casting marks of a RB20 box.

  • 4 weeks later...
  • 4 weeks later...
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...