Jump to content
SAU Community

Recommended Posts

I'm toying with the idea of repowering an A31 with a nissan Y40 V8.

It'd be a fairly straight forward coversion I think. But does anyone have any clues about what would be involved in bypassing the ECU? Do things like the signal for the temperature guage come from the ECU?

Your thoughts please.

Link to comment
https://www.sau.com.au/forums/topic/138410-efi-to-carb-conversion/
Share on other sites

run the factory ECU and just do not run injectors. use a carby to control fuel and let the ECU do the rest.

Why the hell would you want to do it anyway?

I have seen some nice quad throttle SR20's that rev to 10,000 with huge cams.

buy why with a Y40?

Because I can get one with a rebuit auto quite cheap. Plus it would make a nice cruiser. 190hp, and no lag. The cool sound of a V8, and the comfort of a ceffy. Plus the rocker covers are aluminium with "NISSAN" cast on them.

It'd be something a bit different. And, it would do mean skids! :teehee:

Lumpy cams?

The Y40 is a single cam pushrod V8, out of an old school president. I wouldn't shag around souping it up. I have other toys for that. Lopey idle's wear thin pretty quick. Plus the Y40 is only a three main crank, so revving them past 6000 is a recipe for broken engines. I just think it would be a nice cruiser.

well, cam then...or not

at least do some justice to it with extractors and a decent exhaust to make it sound alright

about the ecu tho, wouldn't it chuck a wobbly since there are no injectors to run?

Edited by usherly

Thats kind of what I was wondering. I'd rather remove the ecu, and just bridge out the wires nessesary to make it run, and to make the guages function. I'd need to reg down the fuel pressure. (If not change the pump) I'd be starting with an RB20E car, so there's not guite as much gadgetry to delete.

if the ECU chucks a wobbly cos there are no injectors, plug em back in and just dont use them...

you said "the comfort of a ceffy"

have you been in one? they are like dirty old VN commodores!!!

get a laurel and drop in a Infinity motor. Now that would be the shiz

Ive owned over 30 cars so far, and my A31 is by far the newest. Hence the comfort. As for buying a laurel and a hell expensive motor, that defeats the whole purpose. I have lots of other toys I'd rather invest the big dollars in. It's all about doing stuff on the cheap for me. Any fool can blow a huge wad of cash.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...