Jump to content
SAU Community

Recommended Posts

Depends.

Expect the car too have had some accident damage, but really, if there is no chassis or alingement damage then who cares.

- Obviously you'd care if your after a show car.

If the chassis is fair then most everything else is replacable. You just need too factor in the cost (and labour if you can't do it yourself) too bring the car upto standard.

Personally, if you after a car your going thrash, do track days in, then I'd be looking for a bargin high kay car and bargin the owner down too a cost where you can afford repairs.....

Good Luck.

Link to comment
https://www.sau.com.au/forums/topic/138442-low-k-gtrs/#findComment-2578152
Share on other sites

Have a look around the forum. Particularly the stickys in the various sections. You will learn a lot.

Basically 98% of them are wound back. A 1989 GTR with 40,000 less k's than my 1999 GTT? I don't think so.

You buy on a condition based appraisal. That's why with imports it's worth having them checked out by a workshop that does work on these types of cars regularly. If it costs you $1000 in workshop inspections before you find one and then you end up NOT rebuilding the engine, you have saved yourself at least $6000.

Link to comment
https://www.sau.com.au/forums/topic/138442-low-k-gtrs/#findComment-2578174
Share on other sites

Depends.

Expect the car too have had some accident damage, but really, if there is no chassis or alingement damage then who cares.

- Obviously you'd care if your after a show car.

If the chassis is fair then most everything else is replacable. You just need too factor in the cost (and labour if you can't do it yourself) too bring the car upto standard.

Personally, if you after a car your going thrash, do track days in, then I'd be looking for a bargin high kay car and bargin the owner down too a cost where you can afford repairs.....

Good Luck.

Would you buy something stock or a car with bolton mods if you had the choice ?

Thanks for replying

Link to comment
https://www.sau.com.au/forums/topic/138442-low-k-gtrs/#findComment-2578200
Share on other sites

Have a look around the forum. Particularly the stickys in the various sections. You will learn a lot.

Basically 98% of them are wound back. A 1989 GTR with 40,000 less k's than my 1999 GTT? I don't think so.

You buy on a condition based appraisal. That's why with imports it's worth having them checked out by a workshop that does work on these types of cars regularly. If it costs you $1000 in workshop inspections before you find one and then you end up NOT rebuilding the engine, you have saved yourself at least $6000.

Have you got any idea of where I could locate a good repairer who offers pre purchase appraisals of GTRs in Perth ?

Thanks for your reply

Link to comment
https://www.sau.com.au/forums/topic/138442-low-k-gtrs/#findComment-2578210
Share on other sites

Low km GTRs exist. Granted mine is a 1997 model but it only has 32k on it. :( Knowning who owned it since 1999 helps verify that though.

If you are unsure check seats, steering wheel, handbrake, pedals etc for wear. It's pretty obvious when a car has done a lot of kms. Low km cars from Japan are around, I imported a 1985 RX7 with only 45k on it, was practically brand new under build up from being unused. You just have to be careful and know where to look.

The one in the trader for $18.5k with 128k on it looks nice, tidy and honest.

Link to comment
https://www.sau.com.au/forums/topic/138442-low-k-gtrs/#findComment-2578243
Share on other sites

or demand 6-8 grand off the price......if they don't agree.....walk away....

once you get the car take it apart and rebuild it with that 6-8grand.....sit back and relax and never have to worry about broken engine again.....:(

Link to comment
https://www.sau.com.au/forums/topic/138442-low-k-gtrs/#findComment-2578244
Share on other sites

I have heard that if the plenum chamber is not flaked and missing paint that it is a good sign that the motor has not seen high kilometres. Would anybody have any other views or experiences?

Yeah I have seen a few that have been resprayed. They have often been done badly so is easy to pick (can see where different layers of paint begin and end).

Link to comment
https://www.sau.com.au/forums/topic/138442-low-k-gtrs/#findComment-2578279
Share on other sites

what other components would you repair ?

A lot of other things that are perishable and wear out over time... Time isn't kind to all sorts of parts to cars. Can happen with kms on them or not.

Edited by GT-R32
Link to comment
https://www.sau.com.au/forums/topic/138442-low-k-gtrs/#findComment-2578316
Share on other sites

I wouldnt buy a 32 from Japan in todays day.

Its just too risky and can end up costing you a lot more.

Buy something thats already here, that you can have inspected by a local expert. You stand a better chance of getting a good car that isnt clapped out that way

Link to comment
https://www.sau.com.au/forums/topic/138442-low-k-gtrs/#findComment-2578741
Share on other sites

one of the 1988 cefiro's we imported came with 12000kms or so on it. It also came with a log book that had been filled in at the same Nissan dealership every 6 months (hehe was odd, their seal changed as the Nissan logo evolved). It even came with the factory lace doileys and original purchase reciepts etc in the owner's name.

Was such a bizzare car... we didn't believe it so we had a mechanic go check the car while it sat in japan, and found that it actually was hardly ever driven... So the rare ones do exist.

I have heard that if the plenum chamber is not flaked and missing paint that it is a good sign that the motor has not seen high kilometres. Would anybody have any other views or experiences?

Not necessarily, the paint flakes off as its not bonded well to the plenum from the factory. Simple heating and cooling causes it to seperate, regardless of the km's its done.

Basically as the guys above stated, go by the condition of the car, don't believe the kms. If the car is in Japan, get it inspected first, if its local, then take it for a test drive from a cold start. Take the car to a mechanic who works on GTR's to have it inspected.

Link to comment
https://www.sau.com.au/forums/topic/138442-low-k-gtrs/#findComment-2578775
Share on other sites

one of the 1988 cefiro's we imported came with 12000kms or so on it. It also came with a log book that had been filled in at the same Nissan dealership every 6 months (hehe was odd, their seal changed as the Nissan logo evolved). It even came with the factory lace doileys and original purchase reciepts etc in the owner's name.

Was such a bizzare car... we didn't believe it so we had a mechanic go check the car while it sat in japan, and found that it actually was hardly ever driven... So the rare ones do exist.

Not necessarily, the paint flakes off as its not bonded well to the plenum from the factory. Simple heating and cooling causes it to seperate, regardless of the km's its done.

Basically as the guys above stated, go by the condition of the car, don't believe the kms. If the car is in Japan, get it inspected first, if its local, then take it for a test drive from a cold start. Take the car to a mechanic who works on GTR's to have it inspected.

I have a car lined up with a knock in the bottom end and the mechanic selling it says I have a choice of a low km engine or a reconditioned unit from Japan . He will install engine and repair minor rust spots .Its got 17inch aftermarket rims ,adj coilover suspension. Does this sound like a better option than a Jap car?

Link to comment
https://www.sau.com.au/forums/topic/138442-low-k-gtrs/#findComment-2578782
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
    • I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
    • Is it alright to top up with just another green coolant?
×
×
  • Create New...