Jump to content
SAU Community

Recommended Posts

hey guys

got a question about mufflers. when you buy one do they have a flo rating like hi flo cats do? my mate recons i'll get better performance if i change my muffler to a cannon. i didnt agree. i thought mufflers were all about sound not performance. you piping gives you the performance and you muffler keeps it quiet? the cat restricts air flow but what about your mufflers? do you buy them for athestics and sound or are there actually gains to be made from different mufflers?

Link to comment
https://www.sau.com.au/forums/topic/138542-mufflers-how-restricting-are-they/
Share on other sites

what sort of muffler do you currently have? yes mufflers do restrict. for example, zoom magazine did a test where they got a stock xr6 turbo. they did pressure tests with the stock mufflers and found by removing the centre muffler they gained about 17kw. the restriction at 5500rpm with both mufflers was 0.414bar. when they removed the centre muffler it dropped to 0.207bar. so it halved. but these are stock mufflers which are more restrictive than aftermarket ones.

if you have a 3" system and it isn't a cannon but still is a straight through muffler, then don't bother changing it. the difference would be little.

yeah i have a 3inch system not sure what style you would call my muffler its an aftermarket one got some brand on it cant remember what it is. think they call them oval mufflers same sort of shape as the stock one but with a big tip on the end.

It depends on the internals of that muffler, as Mad082 is saying.

Most mufflers quieten the sound by rebounding the exhaust gas off things until the resonance cancels itself out.

A stock muffler is basically an empty can, with a few "U" shaped bits of metal at each end. The gasses bounce off one, back to the other end of the muffler, then bend again, then out the end-pipe.

A "straight-through" muffler will be louder, because they are basically a can, with a perforated tube from the inlet to the outlet. Some gasses can escape out the perforated tube and into the body of the muffler, but that's about all it does for quietening.

So as you can imagine, the less restrictive design is going to be the better flowing one... better flowing should equate to more power on a turbo'd car.

I beleive on a 4-banger, it will just reduce backpressure, which is what small motors rely on for making torque.

if it is an oval type muffler and a 3" it should be a straight through design, so the gain going to a cannon would be extremely small, if at all. the air has usually slowed down significantly by the time they exit the exhaust. the biggest restriction is the cat. changing your muffler won't do anything accept add more noise. tell your mate he's an idiot.

thanks guys. yeah thats what i thought, u idiot. Thats like saying by putting a cannon muffler on your stock exhaust is gonna give you more power. i doubt it. probably about as much as i got from the 15kw SAU stickers!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Atmospheric vent requires something that doesn't use a MAF for load. You would need a standalone ECU for that.
    • Hey all,   I’ve got an RB25 with a trigger kit that includes a crank wheel, and I’ve hit a wall trying to sort a timing belt tracking issue. The belt either rides right on the edge of the cam/crank pulleys or walks slightly forward once the engine starts. It tracks okay-ish for a moment, then creeps right to the edge—and honestly, it’s stressing me out.   I’ve spent hours removing and reinstalling the belt, double-checking everything:   Tensioner setup is good, checked multiple times Idler pulley and washers are all in the correct places Followed the RB25 timing procedure step-by-step     The only thing I changed was the rear crank washer—I swapped the OEM one for a Neato version, and it made things worse. The belt now sits even more forward than before. I’m beginning to think the crank trigger wheel itself (from the trigger kit) is the issue—poor design or slightly off dimensions.   What’s strange is that with the previous belt setup, it actually ran fine for a couple of years—around 4,000 to 5,000 miles, even with hard driving and high RPMs. But even then, the belt was always riding right on the edge, and I know that’s not ideal or safe long term.   At this point, I’m debating whether to:   Machine a few mm off the crank trigger wheel to bring it back in line, or Replace it entirely with a better-designed unit     Only thing is, I already have the Cherry Hall sensors, bracket, etc.—I just want to replace the wheel only, not the entire kit. Anyone know a brand or supplier that sells just the crank trigger wheel on its own?   Would really appreciate any feedback—especially from anyone who’s run into this exact issue and found a reliable fix.   Thanks in advance.
    • Hi...a little refresh. Is Nistune gonna be enough to run BoV? Or do i need some proper ECU? 
    • Yep that's pretty much what I want to see. Racecars that look and sound like the Group A but with newer tech underneath to make them faster and safer. I'm sure there's enough VK-to-VN commodore, E30 BMWs and Foxbody mustangs shells around to make up a decent number of cars with hopefully a couple of sierras, rx7 and R31s in there too. 
    • Contact Jessestreeter.com/Skevas Racing/JustJap for a new r34 rb gearbox or go a cd00# conversion. No point playing with unknown condition gearboxes.
×
×
  • Create New...