Jump to content
SAU Community

Recommended Posts

Hey guys :O

Ive got a set of R32 GTR forged lightweight rims, with semi slicks for sale

The rims are in fantastic condition, as the pics show, they've been VERY well cared for over their lifetime

The logos on the caps are the "Prince" logos, the last owner did that, but if needs be, they can be taken off with nail polish remover if you prefer as ive been advised the old logos are underneath, seperated by a clear coat which is very easy to see if you have a close look at the caps

The semi slicks are Kuhmo V700's, with easily 85% tread left

The pics below were taken before the semi slicks went on, and they havnt been used since as the motor is out of my car

These rims are just sitting around and its time for them to go as they're wasting space :)

The tyres are worth about $300 each, so you're getting the rims for a steal !

Pickup is available from Sydney, or i can send interstate (at buyers cost) if required

$1400 is all i want for them guys, so be quick :glare:

Either PM me or post up here

Cheers

-Steve

Please note these pics are not the semi slicks, i havnt been able to take pics of them yet :)

03180006.jpg

03180005.jpg

03180004.jpg

03180003.jpg

Link to comment
https://www.sau.com.au/forums/topic/138777-r32-gtr-rims-with-semi-slicks/
Share on other sites

would you be able to weigh each rim for me so i can get a price on freight?

ill organise it all, ma has an account with TNT

would you consider selling without tyres?

interesting brake caliper on that last pic

Sure is Dave

would you be able to weigh each rim for me so i can get a price on freight?

ill organise it all, ma has an account with TNT

would you consider selling without tyres?

Um, ok, i dont have scales at home though, i can get it weighed and let you know asap though :O

Yes ill sell without tyres

A mate of mine got a set of these rims from Brisbane to his door in Sydney through www.packandsend.com.au for $140 as a reference (including insurances etc)

Ill find out the weight and let you know

would you be able to weigh each rim for me so i can get a price on freight?

ill organise it all, ma has an account with TNT

would you consider selling without tyres?

Havnt had a chance to weigh them yet, ive found out they're under 10kg each though, also my postcode is 2228 :rolleyes:

They are the worst looking wheels I have ever seen you are better off melting them down and selling for scrap rather then trying to rip us off $1500 I take them off your hands if you deliver for $20 with my next pension cheque :mad::P:):D:O:(:mad::nuke::mellow: :sorcerer:

Banned.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...