Jump to content
SAU Community

Computer Troubles

AzzurrA

By AzzurrA,
in Queensland

 Share

Recommended Posts

AzzurrA Grand Master

AzzurrA

Posted
Posted

'ello.

Having a few problems with my computer at the moment...

The power supply on the computer has been a bit tempermental for about a week or so... sometimes starting, sometimes not (which required you to unplug it from the wall, leave it for a few mins and then plug it back in) as well as getting fairly noisy.

On Sunday night, heard a bit of a pop/bang in my room in the middle of the night (computer wasn't on) - couldn't see anything out of the ordinary, so went back to sleep.

Got up yesterday morning to come to work, and tried to turn the computer on - when i pushed the power button, the green 'power' light lit up for a split second, then the computer just went dead (this is what it normally does when the power supply decides to be tempermental) but for the life of me i couldn't get it to come back after trying all the usual tricks... figured the power supply must've finally packed it in... no worries i thought.... bought a new one on the way home from work yesterday.... stripped the whole computer down last night to a bare case, gave everything a good dust/clean (it was about a year old, so a bit of dust in there) and rebuilt the computer from the ground up....

after i pulled the 'dead' power supply out, i found that it had a blown capacitor, as well as some other (what appears to be heat related) damage.

went to fire up the rebuilt computer after it was all done.... nothing...

thought i must have missed the power switch connection or something so i pulled it apart again and had a look - nope, everything as it should be....

the motherboard is getting power (as seen by the green indicator light on the board itself) but nothing at all happens when i push the power button....

i'm starting to think maybe when the power supply blew, it sent a big surge through the motherboard or something and fried that as well...

bah... anyone got a spare Socket 775 motherboard/cpu around that i could try swapping my board/cpu with to see if they're still good?

I'm looking to upgrade anyway, but i can't be assed spending a bit over $2.2k for the parts i want.... can anyone do me good prices on hardware? :( (PM me if you like)

The parts i'm after are mainly:

ASUS P5N32-SLI-SE-DELUXE Intel Dual Core 2 nFORCE4-SLI - Motherboard

Intel ATX E6600 CORE 2 DUO /2.4GHz/4MB CACHE/1066FSB/LGA775 - CPU

XFX GeForce 7900GS 256meg DDR3 DVI/TVO PCI-E 480Mhz - Video Card *** x 2 ***

DDR2 1G(1024MB) PC6400 800Mhz RAM(single stick) Kingmax - RAM (Doesn't have to be this brand, but roughly that speed/specs)

Power Supply CoolerMaster iGreenPower 600W SLI Ready (ATX)(RS-600-ASAA) - PSU (Doesn't have to be this PSU, something with similar specs though)

Thermaltake Armor VA8000SWA Silver Alloy Case with 430W (Doesn't have to be this case, just something around this size with good cooling etc)

Oh, also, this means i won't have 'net access except for at work (very, very limited) so if someone needs to reach me for something, feel free to contact my mobile.

Jason

Link to comment
https://www.sau.com.au/forums/topic/139014-computer-troubles/
Share on other sites
AzzurrA Grand Master

AzzurrA

Posted
  • Author
Posted
sounds like your mobo is done

i had to hit the computer markets to replace my older gear

id be trying them

http://www.sundaycomputermarket.com.au/

all manner of cool/old stuff for sale!

its not really old gear.... its only around a year old, and back then it was pretty much top of the line...

Medium Dave Proficient

Medium Dave

Posted
Posted

I have seen this once or twice before and I have been able to ressurect the motherboard by replacing the blown caps, they are there to protect the rest of the motherboard, but you need to find the exact same type of cap to replace them with, but you can usually find them on old motherboards.

Benno31 Experienced

Benno31

Posted
Posted

Jason, before spending money, locate the pins on the mobo for where the ATX power switch connects and try shorting them with a screwdriver and see if the board powers up, I have in a few cases seen ATX power switches fail and the symptoms are the same.

It is a long shot and a rare occurance, but certainly has to be worth a go.

Another and more likely problem is that a MOSFET or CAP has died on the mobo. But you never know. I assume you have replaced the PSU with a new one? I didn't see you specify that in your post above.

AzzurrA Grand Master

AzzurrA

Posted
  • Author
Posted
Jason, before spending money, locate the pins on the mobo for where the ATX power switch connects and try shorting them with a screwdriver and see if the board powers up, I have in a few cases seen ATX power switches fail and the symptoms are the same.

It is a long shot and a rare occurance, but certainly has to be worth a go.

Another and more likely problem is that a MOSFET or CAP has died on the mobo. But you never know. I assume you have replaced the PSU with a new one? I didn't see you specify that in your post above.

Yeah, gonna have a look for dead caps etc this afternoon when i get home. Will also try the thing with the ATX switch.

yeah, i did replace the PSU with a new one:

bought a new one on the way home from work yesterday.... stripped the whole computer down last night to a bare case, gave everything a good dust/clean (it was about a year old, so a bit of dust in there) and rebuilt the computer from the ground up....
R33S2 Grand Master

R33S2

Posted
Posted

bah computers, i wish I had a dollar for every hour I've spent getting them to operate from '82 till now.

Good luck with getting the latest Bahahah it will be old by the time you get home lol

Sad to say but they are not meant to last.

Anyone have a P4 processor fan? :laugh:

R34GTX Rising Star

R34GTX

Posted
Posted

Terry I have a spare socket 478 P4 Fan if need be. I am located north of Brisbane in Morayfield.

PM if you need it!!

bah computers, i wish I had a dollar for every hour I've spent getting them to operate from '82 till now.

Good luck with getting the latest Bahahah it will be old by the time you get home lol

Sad to say but they are not meant to last.

Anyone have a P4 processor fan? :wave:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      The oil pressure sensor for logging, does it happen to be the one that was slowly breaking out of the oil block? If it is,I would be ignoring your logs. You had a leak at the sensor which would mean it can't read accurately. It's a small hole at the sensor, and you had a small hole just before it, meaning you could have lost significant pressure reading.   As for brakes, if it's just fluid getting old, you won't necessarily end up with air sitting in the line. Bleed a shit tonne of fluid through so you effectively replace it and go again. Oh and, pay close attention to the pressure gauge while on track!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • PranK
      My new to me M35 Stagea wagon

      By PranK · Posted

      Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Chupapy
      New r33 owner

      By Chupapy · Posted

      Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
×
×
  • Create New...