Jump to content
SAU Community

Recommended Posts

Rebuild on a RB26 will set back around the 7k depending on what you put in of course-it could be a lot higher with really good gear (like 12K)

There are 32GTR's with running engines around for 18k now...market is dead...sux

dennis lives in sydney, hills district! i know this car and can vouch for it being very tidy! sorry to hear about the big end mate! best of luck with the sale!

cheers Garth

12 is way 2 low, 15 is the lowest people,

it mite have a spun bearing but go buy a stoccka and mod it like i have mine,

im loosing 10 grand if i sell it for 15000,

turbos cost me 3000, clutch cost me 1200, coilovers cost me 850, apexi power intake kit cost me 200, and now yous can add it up and see what it owes me and how much yous would be up for modding a stockka, and these prices are without labour

turbos r&r is nearly 1000, clutch was 550, and coilovers were 200 this was labour,

here is nearly 7 grand in mods fitted to the car, so if some1 buys this for 15000 and builds the motor they have gotten themselves a gtr wiv a new forged intrenaled motor for around the 21 22000 mark,

all that would be needed then is a computer and a fuel system, the turbos and clutch r good for 10 sec passes...

sorry people but 12000 is a nooo.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...