Jump to content
SAU Community

Recommended Posts

guysss

if any one has a problem with there dash lights

i figured out my problem and fixed

after 2 hours of blowing fuses and electric shocks with my cousin.. i figured

wtf... il bypass the switch all togeather and hard wire the wire sto each other

this seemed to work..

but my antena still doesnt work!!!!

could be my head unit me is thinking

Link to comment
https://www.sau.com.au/forums/topic/13955-dash-lights/
Share on other sites

make sure the plug goes behind the deck for the antenna is plug in... if this comes loose then your antenna will not come up..

once this is checked and it is ok, then i beleive the motor in your antenna is stuffed.. happen with me, just replace the antenna dude...might set you back $55 for an auto antenna.

Link to comment
https://www.sau.com.au/forums/topic/13955-dash-lights/#findComment-278408
Share on other sites

PUSHEAD - sorry to say, YOU ARE 100% WRONG.

Even in your thread that refers to preditor666's thread, he clearly states:

" The slashed ones are the stripey ones in the two colours.

Green/red - Power Antenna up/down "

When the radio is turned on, it sends a +12V signal to power antena. This triggers a relay which uses a separate 12V line to power the motor up or down. Ground is via body. If you are using the tape deck or cd player there is no voltage on this wire, thus the antena remains down.

Zdenko - Did your inital problems come about by themselves, or did you install a new head unit (or something else) and then the problems presented themselves?

PS: Please PM me once you have answered the question, so that i can respond, as i may forget to revisit this thread. Also include the thread title.

Link to comment
https://www.sau.com.au/forums/topic/13955-dash-lights/#findComment-279892
Share on other sites

hmmm...don't hard wire stuff! Its a quick and dirty solution, and what happens if you do get a short.. BZZTT who knows what u could blow

Something I discovered last night (after being pulled over by the cops.. oops :).. the tail lights are on the same circuit for the dash lights (speedo, etc). The "tail light" (10A) fuse in the back fusebox is the same circuit for the speedo/tacho, dash lights

Also: many plugs need to be closed or you'll get open circuit and other things attached to the circuit may not work. Disconnect the hazard button plug and you'll notice that your indicators no longer work!! (i discovered this yesterday too... ooops :P but didn't get pulled over for that one)

hehehe: thanx Al :( yup, i think thats pretty much how it all works, so check the separate fuse for the aerial. I think its in the boot fusebox.

The antenna control wire simply is 12v which triggers the motor circuit to go up or down (toggle). Make sure its connected, or otherwise rigged to ACC or connect your own switch.

Link to comment
https://www.sau.com.au/forums/topic/13955-dash-lights/#findComment-282961
Share on other sites

lol whats wrong with hard wireing??

lol it works??

nah i think my switch is stuffed

so if any one is recking there skyline

i want ur switch!!

ahah

but yeh the anntenna i was ment o have a loko at that yesterday but ran out of time...

had my gf calling me to pick her up from work!!!

farken chicks

they al hate city driving!

i wish i cold hard wire her off a bridge!~

Link to comment
https://www.sau.com.au/forums/topic/13955-dash-lights/#findComment-282978
Share on other sites

switch ? hmmm.. Mine doesn't have a switch?? You talking about the instrument cluster or other parts of the dash above the stereo? I know some have a dimmer knob for the instrument lights..mine doesn't look like it ever had one.

a'hrm.. look whos angry at somebody :)

Link to comment
https://www.sau.com.au/forums/topic/13955-dash-lights/#findComment-282989
Share on other sites

So is your antenna working know?

Originally posted by predator666

hmmm...don't hard wire stuff! Its a quick and dirty solution, and what happens if you do get a short.. BZZTT who knows what u could blow

Please explain, as i work as a electronic feild technecian and consider soldiering and covering with heat shrink to be the best and safest way to connect wires.

Link to comment
https://www.sau.com.au/forums/topic/13955-dash-lights/#findComment-283937
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What an awesome idea to fit the facelift Lamborghini Diablo headlights. They are a perfect fit!
    • An update regarding the registration with the DVLA I sent off the paperwork the day after I collected the car from the port, two weeks later it was all returned with a letter explaining they have rejected the application. This was because the cheque was £20 short for the road tax (I used a price list I found online). Nevermind it is what it is, it was sent back to them the following day with a new cheque. Fast forward another 2 weeks or so, I called them for an update to be told it had been rejected. Yesterday (16th September) I received the documents back along with another letter, this time it was because I didn't put an X in one box on the V750 (personalised number plate certificate), which declared that I had the rights to the personalised number plate. Why this wasn't mentioned in the first rejection letter, I don't know, but it could have saved this headache. The documents were sent back today, so fingers crossed third times a charm and it'll FINALLY be registered on the road just in time for the bad weather (woohoo!) To cheer myself up I lowered the front 25mm, was sick of seeing it sit like a monster truck. No idea how much clearance I'll have getting on and off the driveway, I'll worry about that when I can actually drive it
    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
×
×
  • Create New...